Standalone waste-based cellulose acetate membrane for river water treatment

Access to clean drinking water is a global challenge, with approximately 2 billion people lacking adequate access due to factors such as pollution, inadequate infrastructure, and socioeconomic inequalities. Natural organic matter (NOM) is a common contaminant in water sources, contributing to coloration, odors, and potential indirect health risks. Membrane filtration is an effective method for removing NOM, with various polymers used for membrane fabrication. Discarded cigarette butts are a significant source of pollution and contribute to environmental degradation. However, few studies have explored the performance of a standalone waste-based cellulose acetate (W-CA) membrane for real surface water treatment, leaving a critical knowledge gap in sustainable membrane technology. This study focuses on utilizing W-CA from cigarette butts, to produce membranes for surface water treatment. A comparison is made with commercial cellulose acetate (C-CA) and polyvinylidene difluoride (PVDF) membranes. Membranes were fabricated via the phase inversion method and characterized for hydrophilicity, morphology, pore size distribution, and surface chemistry. The W-CA membrane exhibited higher hydrophilicity, clean water permeability, and pore density when compared to C-CA and PVDF membranes. It demonstrated high pure water permeability (1315.10 Lm -2 h -1 bar -1 ) and effective removal of humic acid representing NOM, achieving a removal rate of 92.77%. Such high permeability and substantial NOM removal underscore the novelty and practical relevance of employing W-CA for sustainable water treatment applications. • Waste cellulose acetate was used to create efficient water treatment membranes. • W-CA membrane showed high water permeability of 1315.10 Lm -2 h -1 bar -1 . • The membrane removed 92.77% of natural organic matter from river water. • W-CA membrane demonstrated superior hydrophilicity and pore density. • This work promotes sustainability by recycling waste materials for water filtration.

Authors

Institutions

Publication Details

Journal
Cleaner Waste Systems
Published
2025-03-01
DOI
https://doi.org/10.1016/j.clwas.2025.100247
Citations
4
Primary Topic
Membrane Separation Technologies
Type
article
Field-Weighted Citation Impact
3.27
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Standalone waste-based cellulose acetate membrane for river water treatment

Norazanita Shamsuddin, Yusuf Wibisono, Kajornsak Faungnawakij, Sutarat Thongratkaew et al.
4 citations
Cleaner Waste Systems
Membrane Separation Technologies
3.27
article

Standalone waste-based cellulose acetate membrane for river water treatment

Norazanita Shamsuddin, Yusuf Wibisono, Kajornsak Faungnawakij, Sutarat Thongratkaew, Ibrahim Maina Idriss, Muhammad Saifullah Abu Bakar, Muhammad Roil Bilad
article en
4 citations

Abstract

Access to clean drinking water is a global challenge, with approximately 2 billion people lacking adequate access due to factors such as pollution, inadequate infrastructure, and socioeconomic inequalities. Natural organic matter (NOM) is a common contaminant in water sources, contributing to coloration, odors, and potential indirect health risks. Membrane filtration is an effective method for removing NOM, with various polymers used for membrane fabrication. Discarded cigarette butts are a significant source of pollution and contribute to environmental degradation. However, few studies have explored the performance of a standalone waste-based cellulose acetate (W-CA) membrane for real surface water treatment, leaving a critical knowledge gap in sustainable membrane technology. This study focuses on utilizing W-CA from cigarette butts, to produce membranes for surface water treatment. A comparison is made with commercial cellulose acetate (C-CA) and polyvinylidene difluoride (PVDF) membranes. Membranes were fabricated via the phase inversion method and characterized for hydrophilicity, morphology, pore size distribution, and surface chemistry. The W-CA membrane exhibited higher hydrophilicity, clean water permeability, and pore density when compared to C-CA and PVDF membranes. It demonstrated high pure water permeability (1315.10 Lm -2 h -1 bar -1 ) and effective removal of humic acid representing NOM, achieving a removal rate of 92.77%. Such high permeability and substantial NOM removal underscore the novelty and practical relevance of employing W-CA for sustainable water treatment applications. • Waste cellulose acetate was used to create efficient water treatment membranes. • W-CA membrane showed high water permeability of 1315.10 Lm -2 h -1 bar -1 . • The membrane removed 92.77% of natural organic matter from river water. • W-CA membrane demonstrated superior hydrophilicity and pore density. • This work promotes sustainability by recycling waste materials for water filtration.

Cleaner Waste SystemsVol. 10
National Science and Technology Development Agency (TH), University of Brawijaya (ID), Universiti Brunei Darussalam (BN), National Nanotechnology Center (TH)
Clean water and sanitation
Openalex Percentile: Top 10%
Membrane Separation Technologies
3.27
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.