Valve Disc Dynamics of a Reciprocating Liquid Hydrogen Pump

Reciprocating liquid hydrogen pumps are essential equipment for hydrogen refueling stations with liquid hydrogen stored. The valves play a crucial role in facilitating unidirectional flow and the pressurization of liquid hydrogen within the pump. This paper establishes a comprehensive numerical model to simulate the whole working cycle of a reciprocating liquid hydrogen pump. The influence of valve parameters and pump operating conditions on the motion characteristics of valves, including lift, closing lag angle, and impact velocity, is investigated. The results indicate that with the maximum lift of the suction valve at 10 mm and the discharge valve at 5 mm, the closing lag angle is minimal, and the impact velocity of the valve falls within an acceptable range. The optimal rotation speed range is between 200 and 300 rpm, within which both the closing lag angle and impact velocity of valves are minimized. Excessive maximum lift and low rotational speed lead to significant oscillations and high impact velocity in valve movement with the effects being more pronounced in the suction valve. The effects of the subcooling degree of inflow liquid hydrogen on the valve motion are further analyzed. The findings suggest that the subcooling degree of inflow liquid hydrogen helps inhibit the vaporization in the pump operation and ensures the valves work correctly. This work would contribute to pump optimization and valve collision failure analysis in reciprocating liquid hydrogen pumps.