Facile fabrication of p-n heterostructure based on Pt/NiO-CeO2 nanosheet-assembled hierarchical structures for selective detection of benzene vapour

• Pt-loaded NiO-CeO 2 nanosheet-assembled hierarchical structures were prepared using the hydrothermal method. • 1.0 wt.% Pt-loaded NiO-CeO 2 sensor showed a superior response of 2.7 to 2 ppm benzene. • A sensitivity of 0.87 ppm -1 and a detection limit of 0.07 ppm at 100°C were observed. • The sensor was stable to 2 ppm benzene in the presence of 40-70 %RH. We report on the fabrication of NiO-CeO 2 nanosheet-assembled hierarchical structures loaded with various weight percentages of Pt for selective detection of low concentrations of benzene vapour at low functional temperatures. Surface analyses showed that the nanomaterials are made of nanosheet-assembled hierarchical structures. Meanwhile, the structural X-ray photoelectron spectroscopy analyses confirmed the loading of Pt on the surface of NiO-CeO 2 heterostructures. The sensing findings showed that the 1.0 wt.% Pt-loaded NiO-CeO 2 sensor showed more sensitivity to benzene, amongst other target analytes. The sensor demonstrated a superior response of 2.7 to 2 ppm benzene, a sensitivity of 0.87 ppm -1 , and a minimal detection limit of 0.07 ppm at a functional temperature of 100°C. The sensor was very stable to benzene in the presence of 40-70% relative humidity. Increasing the temperature, both the response and sensitivity reduced, while the detection limit increased, showing that 100°C is an optimal temperature. The improved sensing characteristics were associated with higher surface defects and surface area, as well as the loading of Pt, which acted as a catalyst for benzene adsorption. The smaller optical band gap offered extra adsorption sites for benzene to capture electrons in the conduction band easily. The strong catalytic effect of Pt significantly enriched the sensitivity of chemical and electronic sensitization. The sensing mechanism linked to the benzene detection induced by the loading of Pt was discussed in detail.

Authors

Institutions

Publication Details

Journal
Surfaces and Interfaces
Published
2025-03-01
DOI
https://doi.org/10.1016/j.surfin.2025.106131
Citations
2
Primary Topic
Gas Sensing Nanomaterials and Sensors
Type
article
Field-Weighted Citation Impact
1.46

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Facile fabrication of p-n heterostructure based on Pt/NiO-CeO2 nanosheet-assembled hierarchical structures for selective detection of benzene vapour

Hendrik Christoffel Swart, David Edmond Motaung, Rapelang G. Motsoeneng, Thabang J. Theka et al.
2 citations
Surfaces and Interfaces
Gas Sensing Nanomaterials and Sensors
1.46
article

Facile fabrication of p-n heterostructure based on Pt/NiO-CeO2 nanosheet-assembled hierarchical structures for selective detection of benzene vapour

Hendrik Christoffel Swart, David Edmond Motaung, Rapelang G. Motsoeneng, Thabang J. Theka, Boiketlo R.J. Thamaga, Katlego L. Morulane, Jodinio Lemena
article en
2 citations

Abstract

• Pt-loaded NiO-CeO 2 nanosheet-assembled hierarchical structures were prepared using the hydrothermal method. • 1.0 wt.% Pt-loaded NiO-CeO 2 sensor showed a superior response of 2.7 to 2 ppm benzene. • A sensitivity of 0.87 ppm -1 and a detection limit of 0.07 ppm at 100°C were observed. • The sensor was stable to 2 ppm benzene in the presence of 40-70 %RH. We report on the fabrication of NiO-CeO 2 nanosheet-assembled hierarchical structures loaded with various weight percentages of Pt for selective detection of low concentrations of benzene vapour at low functional temperatures. Surface analyses showed that the nanomaterials are made of nanosheet-assembled hierarchical structures. Meanwhile, the structural X-ray photoelectron spectroscopy analyses confirmed the loading of Pt on the surface of NiO-CeO 2 heterostructures. The sensing findings showed that the 1.0 wt.% Pt-loaded NiO-CeO 2 sensor showed more sensitivity to benzene, amongst other target analytes. The sensor demonstrated a superior response of 2.7 to 2 ppm benzene, a sensitivity of 0.87 ppm -1 , and a minimal detection limit of 0.07 ppm at a functional temperature of 100°C. The sensor was very stable to benzene in the presence of 40-70% relative humidity. Increasing the temperature, both the response and sensitivity reduced, while the detection limit increased, showing that 100°C is an optimal temperature. The improved sensing characteristics were associated with higher surface defects and surface area, as well as the loading of Pt, which acted as a catalyst for benzene adsorption. The smaller optical band gap offered extra adsorption sites for benzene to capture electrons in the conduction band easily. The strong catalytic effect of Pt significantly enriched the sensitivity of chemical and electronic sensitization. The sensing mechanism linked to the benzene detection induced by the loading of Pt was discussed in detail.

Surfaces and InterfacesVol. 61
University of the Free State (ZA)
Department of Science and Innovation, South Africa, Department of Science and Technology, Ministry of Science and Technology, India
Openalex Percentile: Top 19%
Gas Sensing Nanomaterials and Sensors
1.46
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.