Study on the influence factors of HST running in the tunnels at 400 km/h

Purpose The paper aims to clarify the operation rationality of high speed trains (HSTs) under tunnel condition with the speed of 400 km/h through representative aerodynamic factors including running drag, eardrum comfort, carriages noise, aerodynamic loads on tunnel ancillary facilities and HST, micro-pressure waves, and then put forward engineering suggestions for higher speed tunnel operation based on the analysis. Design/methodology/approach Based on the field measurement data of CR400AF-C and CR400BF-J tunnel operation, correlations between each aerodynamic indicators with HST speed were established. By analyzing the safety reserve of aerodynamic indicators at 350 km/h and the sensitivity of each indicator to HST speed increasing and the indicators’ formation mechanism, the coupling relationship between various indicators was obtained. Findings The sensitivity of different aerodynamic indicators to speed variation differed. The aerodynamic indicators representing flow field around HST showed a linear relationship with HST speed including noise, eardrum comfort, aerodynamic load on HST body. The positive aerodynamic load on tunnel auxiliary facilities and the micro-pressure wave at the entrance of the tunnel have the same sensitivity to the 3th-power relation of HST speed. The over-limit proportion of micro-pressure wave was the highest among the indicators, and aerodynamic buffering measures were recommended for optimization. The open tunnel pressure relief structure is recommended, while allowing trains to pass through the tunnel at an unconditional speed of 380 km/h. Originality/value Comprehensive evaluation of multiple aerodynamic indicators for HST tunnel operation with higher speeds was realized. The main engineering requirements to release aerodynamic effect were identified and the optimization scheme is proposed.