Degradation Behavior of Biodegradable and Conventional Polymers for Gill Nets, Exposed to Accelerated Aging

Replacing nondegradable plastics in fishing gear with abrasion-resistant biodegradable polymers is expected to reduce marine pollution caused by seabed contact and to lower the environmental impact of abandoned, lost, or otherwise discarded fishing gear (ALDFG). The chemical and physical properties, as well as the tribological behavior of conventional polyamide (PA6) and biodegradable poly butylene succinate-co-adipate-co-terephthalate (PBSAT) monofilaments for a commonly used fishing gear (gill nets), treated under accelerated aging simulating outdoor conditions, have been studied. A plethora of different methods have been used to investigate the degradation mechanism, including scanning electron microscopy, optical microscopy, 3D imaging and wear measurements, nanoindentation, mechanical and tribological testing, ATR-FTIR analyses (including micro-ATR-FTIR microscopy), and 1H NMR spectroscopy. FTIR data indicate alterations in the outermost monofilament layer, and NMR analysis corroborates that the aging effects initially take place at the surface. PA6 showed signs of chain cleavage, while PBSAT did not show any sign of degradation, indicating hydrolysis to small, dissolved molecules during aging. The findings revealed that for both PA6 and PBSAT, the process of aging exerts a small influence on the tensile modulus. After a thousand hours of aging, an increase in the tensile modulus was observed, amounting to 21% and 5%, respectively, for PA6 and PBSAT. However, a pronounced impact on the elongation at break was detected. The elongation at break diminished by approximately 67% and 91% for PA6 and PBSAT, respectively. Tribological testing of the monofilaments shows higher wear and abrasion of the PBSAT monofilament under dry conditions compared to PA6. Nevertheless, under conditions of lubrication by seawater, the wear and friction force exerted by PBSAT and PA6 were found to be comparable. This study demonstrates that biodegradable PBSAT materials can replace nondegradable PA6 in gill nets.

Authors

Institutions

Publication Details

Journal
ACS Applied Polymer Materials
Published
2025-02-26
DOI
https://doi.org/10.1021/acsapm.4c03333
Citations
1
Primary Topic
Microplastics and Plastic Pollution
Type
article
Field-Weighted Citation Impact
0.50

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Degradation Behavior of Biodegradable and Conventional Polymers for Gill Nets, Exposed to Accelerated Aging

Roger B. Larsen, Christian W. Karl, James W. Comerford, Stephan Kubowicz et al.
1 citations
ACS Applied Polymer Materials
Microplastics and Plastic Pollution
0.50
article

Degradation Behavior of Biodegradable and Conventional Polymers for Gill Nets, Exposed to Accelerated Aging

Roger B. Larsen, Christian W. Karl, James W. Comerford, Stephan Kubowicz, Bjørnar Arstad, Anna-Maria Persson, Eduardo Grimaldo, Szymon Bernat, Kjell Olafsen, Gaute Stenerud, Sigrid Hakvaag
article en
1 citations

Abstract

Replacing nondegradable plastics in fishing gear with abrasion-resistant biodegradable polymers is expected to reduce marine pollution caused by seabed contact and to lower the environmental impact of abandoned, lost, or otherwise discarded fishing gear (ALDFG). The chemical and physical properties, as well as the tribological behavior of conventional polyamide (PA6) and biodegradable poly butylene succinate-co-adipate-co-terephthalate (PBSAT) monofilaments for a commonly used fishing gear (gill nets), treated under accelerated aging simulating outdoor conditions, have been studied. A plethora of different methods have been used to investigate the degradation mechanism, including scanning electron microscopy, optical microscopy, 3D imaging and wear measurements, nanoindentation, mechanical and tribological testing, ATR-FTIR analyses (including micro-ATR-FTIR microscopy), and 1H NMR spectroscopy. FTIR data indicate alterations in the outermost monofilament layer, and NMR analysis corroborates that the aging effects initially take place at the surface. PA6 showed signs of chain cleavage, while PBSAT did not show any sign of degradation, indicating hydrolysis to small, dissolved molecules during aging. The findings revealed that for both PA6 and PBSAT, the process of aging exerts a small influence on the tensile modulus. After a thousand hours of aging, an increase in the tensile modulus was observed, amounting to 21% and 5%, respectively, for PA6 and PBSAT. However, a pronounced impact on the elongation at break was detected. The elongation at break diminished by approximately 67% and 91% for PA6 and PBSAT, respectively. Tribological testing of the monofilaments shows higher wear and abrasion of the PBSAT monofilament under dry conditions compared to PA6. Nevertheless, under conditions of lubrication by seawater, the wear and friction force exerted by PBSAT and PA6 were found to be comparable. This study demonstrates that biodegradable PBSAT materials can replace nondegradable PA6 in gill nets.

ACS Applied Polymer MaterialsVol. 7(5)
SINTEF (NO), SINTEF Industry (NO), UiT The Arctic University of Norway (NO)
Norges Forskningsråd
Openalex Percentile: Top 43%
Microplastics and Plastic Pollution
0.50
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.