Electrical Property Measurement on Antistatic Coating During Aging Process

This paper deals with one of the methods for protecting against an electrostatic charge by using a conductive coating. We focus on methyl-silicone resin with the addition of a conductive polymer. The individual electrical parameters of these coatings are studied because these parameters determine the ability of charge leakage. The purpose of this study was to find out if the coating would change its electrical parameters after some time and if the antistatic protection purpose of the coating would deteriorate. We used the dielectric spectroscopy method for the measurements. This method was chosen because conductive polymers are basically semiconductors, and the insulation parameters were measured by this method. After aging, another set of measurements was made, and the results were compared. We found that the electrical parameters of the antistatic coating were considerably changed by the aging process. The reliability of antistatic paints was proven in these experiments. The paints presented had high values of conductivity in general, and after our experiments, the most reliable conductive paintings appeared to be the ones with the PANI polymer. For reliable electrostatic charge elimination on non-conductive surfaces, the BISIL paint proved to be the best choice. Our experiments also proved the influence of the underlying surface material on the electrical parameters of the paintings. Furthermore, we proved that the aging process influenced the loss factor of the paintings.