The Impact of Vibrations on the Hand–Arm System and Body of Agricultural Tractor Operators in Relation to Operational Parameters, Approach: Analytical Hierarchical Process (AHP)

This paper presents research on the impact of vibrations on the hand–arm and body system of agricultural tractor operators as ergonomic indicators in relation to certain operational parameters. The measurements were conducted on a LANDINI POWERFARM 100 tractor on agricultural production areas and access roads of the Agricultural and Veterinary School in Osijek. The measurements followed the ISO 5008:2015 standard, which describes the creation of test tracks: a smooth track of 100 m in length and a rough track of 35 m in length. Body vibration measurements were conducted according to the prescribed standards HRN ISO 2631-1: 1999/A1:2019 and HRN ISO 2631-4:2010. Hand–arm system vibration measurements were performed according to the prescribed standards HRN ISO 5349-1:2008 and HRN ISO 5349-2:2008/A1:2015. After the measured data were processed, a three-factor analysis of variance was performed, where some operational parameters were designated as A—agrotechnical surfaces (6 types), B—tractor speed (6 speeds), and C—tire air pressure (3 pressures), along with multiple regression analysis and the AHP (analytical hierarchical process). This research determined that none of the measured hand–arm system vibrations exceeded the warning (2.5 ms−2) or limit (5 ms−2) values of daily exposure. Furthermore, vibrations affecting the operator’s body in the x-axis at higher speeds and pressures C2 and C3, in the y-axis at higher speeds and pressures C1 and C2, and in the z-axis at the highest speed and pressures C1 and C2 were found to exceed the daily exposure warning value of 0.5 ms−2. It was concluded that the operator’s health is at risk, and it is recommended that the seat’s air suspension system be inspected to prevent further complications in a timely manner.