New electric force and charge exchange modules in discrete element model enables particle dynamics simulation in electric field

Discrete element modeling (DEM) is an important technique for particle dynamics simulation. The field of metal additive manufacturing often utilizes DEM to simulate the rheological behaviors of powder. Standard contact and short-range interactions are sufficient in most cases but insufficient to describe the particle dynamics with the influence of an electric field. Modeling such a system requires additional physics to describe the particle–field interactions. The relevant physics has been experimentally understood but is not yet available in DEM. Here, we develop a charge exchange and an electric force module. The electric force module governs particle response to the electric field, while the charge exchange module enables particles to acquire proper charge during contact with charged geometries. We validate the modules against analytical calculations and high-speed videos of electrostatic powder deposition experiments. Notably, the model struggles to capture the initial particle levitation. We later deploy a modified electric field, as supported by static electric field simulation, to better approximate the electric field penetration into the powder layer. This modification improves the model’s capability of simulating realistic particle levitation. The results highlight the challenges of modeling particle behaviors in the electric field while demonstrating the feasibility of obtaining quantitative results, which are difficult to measure experimentally.