Visible-light-driven photocatalytic degradation of organic dyes using a TiO2 and waste-based carbon dots nanocomposite

Herein we report a visible-light-active photocatalytic nanocomposite (NC 50:50 ) prepared from carbon dots (CDs) and TiO 2 nanoparticles, which was applied to the photodegradation of organic dyes in water. The CDs incorporated corn stover, a major agricultural waste, and were prepared via hydrothermal treatment. Using a visible-light irradiation source and the dye methylene blue as a representative of the organic dyes class, we observed that a 374 % enhancement of the catalytic performance was achieved by adding CDs relative to bare TiO 2 . This was possible due to increased visible-light absorption and better photonic efficiency. Tests using reactive species scavengers indicated that three active species (superoxide anion, hydroxyl radicals, and electrons) were responsible for the photodegradation process, differing from bare TiO 2 in which only the hydroxyl radical has a relevant role. Photocatalytic degradation was also observed toward Rhodamine B, Orange II and Methyl Orange. Finally, we performed a life cycle assessment (LCA) study to assess and analyse the associated environmental impacts of NC 50:50 compared with other alternatives, which revealed that NC 50:50 is the alternative resulting in the least environmental impacts. In summary, NC 50:50 could, under visible-light irradiation, efficiently remove different organic dyes while incorporating organic waste materials and reducing the impacts associated with their use. We expect that this study provides a base for a more environmentally sustainable design of visible-light-active photocatalysts via waste upcycling. • Visible-light active photocatalysts (NC 50:50 ) were made from TiO 2 and Carbon Dots. • Waste upcycling was achieved by incorporating corn stover in the Carbon Dots. • NC 50:50 presented an improved visible-light absorption and photonic efficiency. • NC 50:50 presented a 374 % enhancement of the catalytic efficiency compared to TiO 2. • The relative environmental impact of NC 50:50 was much lower than those of TiO 2.

Authors

Institutions

Publication Details

Journal
Colloids and Surfaces A Physicochemical and Engineering Aspects
Published
2025-02-20
DOI
https://doi.org/10.1016/j.colsurfa.2025.136475
Citations
13
Primary Topic
Advanced Photocatalysis Techniques
Type
article
Field-Weighted Citation Impact
4.73

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Visible-light-driven photocatalytic degradation of organic dyes using a TiO2 and waste-based carbon dots nanocomposite

Ana T. S. C. Brandão, Juan Manuel Lázaro Martínez, Joaquim C. G. Esteves da Silva, Luís Pinto da Silva et al.
13 citations
Colloids and Surfaces A Physicochemical and Engineering Aspects
Advanced Photocatalysis Techniques
4.73
article

Visible-light-driven photocatalytic degradation of organic dyes using a TiO2 and waste-based carbon dots nanocomposite

Ana T. S. C. Brandão, Juan Manuel Lázaro Martínez, Joaquim C. G. Esteves da Silva, Luís Pinto da Silva, Manuel Algarra, Ricardo M. S. Sendão, Carlos M. Pereira, A. Gil
article en
13 citations

Abstract

Herein we report a visible-light-active photocatalytic nanocomposite (NC 50:50 ) prepared from carbon dots (CDs) and TiO 2 nanoparticles, which was applied to the photodegradation of organic dyes in water. The CDs incorporated corn stover, a major agricultural waste, and were prepared via hydrothermal treatment. Using a visible-light irradiation source and the dye methylene blue as a representative of the organic dyes class, we observed that a 374 % enhancement of the catalytic performance was achieved by adding CDs relative to bare TiO 2 . This was possible due to increased visible-light absorption and better photonic efficiency. Tests using reactive species scavengers indicated that three active species (superoxide anion, hydroxyl radicals, and electrons) were responsible for the photodegradation process, differing from bare TiO 2 in which only the hydroxyl radical has a relevant role. Photocatalytic degradation was also observed toward Rhodamine B, Orange II and Methyl Orange. Finally, we performed a life cycle assessment (LCA) study to assess and analyse the associated environmental impacts of NC 50:50 compared with other alternatives, which revealed that NC 50:50 is the alternative resulting in the least environmental impacts. In summary, NC 50:50 could, under visible-light irradiation, efficiently remove different organic dyes while incorporating organic waste materials and reducing the impacts associated with their use. We expect that this study provides a base for a more environmentally sustainable design of visible-light-active photocatalysts via waste upcycling. • Visible-light active photocatalysts (NC 50:50 ) were made from TiO 2 and Carbon Dots. • Waste upcycling was achieved by incorporating corn stover in the Carbon Dots. • NC 50:50 presented an improved visible-light absorption and photonic efficiency. • NC 50:50 presented a 374 % enhancement of the catalytic efficiency compared to TiO 2. • The relative environmental impact of NC 50:50 was much lower than those of TiO 2.

Colloids and Surfaces A Physicochemical and Engineering AspectsVol. 713
Universidad Pública de Navarra (UPNA) (ES), Universidade do Porto (PT), Instituto de Química y Fisicoquímica Biológicas (AR)
Ministerio de Ciencia e Innovación, Fundação para a Ciência e a Tecnologia
Responsible consumption and production
Openalex Percentile: Top 5%
Advanced Photocatalysis Techniques
4.73
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.