Rapid Analysis of Chemical Oxygen Demand by Using a SPE Sensor Based on rGO/Cu/Ni Composite Catalyst Synthesized via One-Step Chemical Reduction

Black-odorous water (BOW) in urban areas poses significant risks to water safety and human health. Chemical oxygen demand (COD) is a critical parameter for the control and monitoring of BOW. However, traditional methods for COD determination are expensive, time-consuming, and involve the use of hazardous chemicals. In this study, reduced graphene oxide (rGO) and transitional metal particles (Cu, Ni) were used as working electrode materials for facile on-site determination of COD in BOW. Three composite materials (rGO/Cu, rGO/Ni, and rGO/Cu/Ni) were synthesized by one-step chemical reduction with different ratios, and their microstructure and chemical composition were characterized. Glucose solution and real water were used to evaluate the electrocatalytic performance of the different sensors. The ternary composite (rGO/Cu/Ni) screen-printed electrode sensor demonstrated excellent performance in COD analysis, with a low limit of detection (18.9 mg L−1), a broad linear detection range from 53 to 1500 mg L−1, and a 1.61% relative error for real water samples. The testing results were highly consistent with those obtained using the standard chromium sulfate method. This study offers promising prospects for the mass production of cost-effective COD electrochemical sensors, facilitating real-time, on-site monitoring of water bodies in major urban areas.