Quantitative comparison of vortex identification methods in three-dimensional fluid flow around bluff bodies

The identification of vortices remains a critical yet unresolved challenge in fluid mechanics, as no universally accepted definition of a vortex exists. This study compares several vortex detection methods applied to the simulation of three-dimensional fluid flows around a cylinder and a rectangular cuboid at various Reynolds numbers and angles of attack, including a highly turbulent flow case. The methods under investigation include traditional Eulerian local criteria – ω -criterion, Q -criterion, and λ 2 -criterion – as well as more recent approaches such as the Ω -method, Rortex method, Omega-Liutex method, and the Lagrangian-averaged vorticity deviation (LAVD). Classification metrics and visualization methods are used to quantify and compare the performance of each method. While traditional criteria and the Rortex method demonstrated accuracy only with carefully chosen parameters, the Ω -, and Omega-Liutex methods achieved reliable results with consistent uncertainty using threshold values near the suggested value of 0.52. In highly three-dimensional turbulent flows, all methods encountered challenges with shear contamination, though the LAVD method was the most robust. However, the LAVD method’s reliance on two-dimensional plane-based analysis limits its ability to capture the full volumetric nature of vortices in such flows, which contributed to reduced accuracy. The LAVD method is threshold independent, and can provide accurate results, however, only on the cost of high computational time. It is concluded that for applications with limited computational resources, simpler methods like the Ω -method may be preferable. However, in scenarios requiring high accuracy, the LAVD method, despite its longer processing time, could be more effective. • Qualitative and quantitative assessment of vortex detection methods’ capabilities. • Studies on the von Karman vortex street relevant to engineering applications. • Quantification of the sensitivity of vortex detection methods to threshold selection.

Authors

Institutions

Publication Details

Journal
International Journal of Heat and Fluid Flow
Published
2025-02-16
DOI
https://doi.org/10.1016/j.ijheatfluidflow.2025.109773
Citations
9
Primary Topic
Fluid Dynamics and Vibration Analysis
Type
article
Field-Weighted Citation Impact
12.01

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Quantitative comparison of vortex identification methods in three-dimensional fluid flow around bluff bodies

Esztella Balla, Kinga Andrea Kovács
9 citations
International Journal of Heat and Fluid Flow
Fluid Dynamics and Vibration Analysis
12.01
article

Quantitative comparison of vortex identification methods in three-dimensional fluid flow around bluff bodies

Esztella Balla, Kinga Andrea Kovács
article en
9 citations

Abstract

The identification of vortices remains a critical yet unresolved challenge in fluid mechanics, as no universally accepted definition of a vortex exists. This study compares several vortex detection methods applied to the simulation of three-dimensional fluid flows around a cylinder and a rectangular cuboid at various Reynolds numbers and angles of attack, including a highly turbulent flow case. The methods under investigation include traditional Eulerian local criteria – ω -criterion, Q -criterion, and λ 2 -criterion – as well as more recent approaches such as the Ω -method, Rortex method, Omega-Liutex method, and the Lagrangian-averaged vorticity deviation (LAVD). Classification metrics and visualization methods are used to quantify and compare the performance of each method. While traditional criteria and the Rortex method demonstrated accuracy only with carefully chosen parameters, the Ω -, and Omega-Liutex methods achieved reliable results with consistent uncertainty using threshold values near the suggested value of 0.52. In highly three-dimensional turbulent flows, all methods encountered challenges with shear contamination, though the LAVD method was the most robust. However, the LAVD method’s reliance on two-dimensional plane-based analysis limits its ability to capture the full volumetric nature of vortices in such flows, which contributed to reduced accuracy. The LAVD method is threshold independent, and can provide accurate results, however, only on the cost of high computational time. It is concluded that for applications with limited computational resources, simpler methods like the Ω -method may be preferable. However, in scenarios requiring high accuracy, the LAVD method, despite its longer processing time, could be more effective. • Qualitative and quantitative assessment of vortex detection methods’ capabilities. • Studies on the von Karman vortex street relevant to engineering applications. • Quantification of the sensitivity of vortex detection methods to threshold selection.

International Journal of Heat and Fluid FlowVol. 113
Budapest University of Technology and Economics (HU)
National Research, Development and Innovation Office
Climate action
Openalex Percentile: Top 1%
Fluid Dynamics and Vibration Analysis
12.01
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.