Recycling of plastic-rich streams from waste electrical and electronic equipment (WEEE) sorting plants: An in-depth study of pyrolysis potential through product characterization and life cycle assessment (LCA)

• Plastic rich streams of distinct properties are produced at WEEE treatment plants. • Valorisation of plastic-rich streams rejected from WEEE sorting plants by pyrolysis. • Pyrolysis oils of WEEE plastics could fuel cement kilns at best case. • Pyrolysis solids have a potential application as adsorbents of drugs in water. • The best LCA is for the waste producing a solid fraction used as adsorbent. Thermochemical recycling is emerging as a viable alternative for the recycling of complex plastic waste streams, such as those originated in waste electrical and electronic equipment (WEEE) sorting facilities. In this work, three different WEEE plastic-rich samples are subjected to pyrolysis and the resulting products are thoroughly analyzed to assess their potential industrial utilization. The pyrolysis processes are conducted in a 3 L non-stirred tank reactor at a heating rate of 15 °C/min, reaching a final temperature of 500 °C with a dwell time of 30 min, using 1 L/min of N 2 as carrier gas. The pyrolysis products are characterized and evaluated for their potential applications, including petrochemical feedstock, refuse derived fuel (RDF), and solid adsorbent. The results indicate that pyrolysis liquids can be used as RDF in cement kilns, provided the halogen content is below acceptance limits. The gases produced could be used as refinery gases after pollutant removal. Additionally, the solid fraction casts promising results in preliminary tests as a drug adsorbent in water, suggesting a new and very interesting path of research. Life cycle assessment (LCA) shows that the pyrolysis of sample C, which has the worst chemical properties, gives the lowest environmental impact, since the solid fraction from this sample is the most effective adsorbent, achieving almost 100 % removal efficiency for the tested drugs. The findings suggest that pyrolysis of plastic-rich streams should not always be focused on the oil production, as it can yield other valuable products.

Authors

Institutions

Publication Details

Journal
Energy Conversion and Management
Published
2025-02-16
DOI
https://doi.org/10.1016/j.enconman.2025.119633
Citations
7
Primary Topic
Recycling and Waste Management Techniques
Type
article
Field-Weighted Citation Impact
6.98

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Recycling of plastic-rich streams from waste electrical and electronic equipment (WEEE) sorting plants: An in-depth study of pyrolysis potential through product characterization and life cycle assessment (LCA)

Borja B. Perez-Martinez, Maider Iturrondobeitia, B.M. Caballero, Adriana Serras-Malillos et al.
7 citations
Energy Conversion and Management
Recycling and Waste Management Techniques
6.98
article

Recycling of plastic-rich streams from waste electrical and electronic equipment (WEEE) sorting plants: An in-depth study of pyrolysis potential through product characterization and life cycle assessment (LCA)

Borja B. Perez-Martinez, Maider Iturrondobeitia, B.M. Caballero, Adriana Serras-Malillos, Miren Martínez‐Santos, A. López-Urionabarrenechea, Esther Acha, Hugo Afonso
article en
7 citations

Abstract

• Plastic rich streams of distinct properties are produced at WEEE treatment plants. • Valorisation of plastic-rich streams rejected from WEEE sorting plants by pyrolysis. • Pyrolysis oils of WEEE plastics could fuel cement kilns at best case. • Pyrolysis solids have a potential application as adsorbents of drugs in water. • The best LCA is for the waste producing a solid fraction used as adsorbent. Thermochemical recycling is emerging as a viable alternative for the recycling of complex plastic waste streams, such as those originated in waste electrical and electronic equipment (WEEE) sorting facilities. In this work, three different WEEE plastic-rich samples are subjected to pyrolysis and the resulting products are thoroughly analyzed to assess their potential industrial utilization. The pyrolysis processes are conducted in a 3 L non-stirred tank reactor at a heating rate of 15 °C/min, reaching a final temperature of 500 °C with a dwell time of 30 min, using 1 L/min of N 2 as carrier gas. The pyrolysis products are characterized and evaluated for their potential applications, including petrochemical feedstock, refuse derived fuel (RDF), and solid adsorbent. The results indicate that pyrolysis liquids can be used as RDF in cement kilns, provided the halogen content is below acceptance limits. The gases produced could be used as refinery gases after pollutant removal. Additionally, the solid fraction casts promising results in preliminary tests as a drug adsorbent in water, suggesting a new and very interesting path of research. Life cycle assessment (LCA) shows that the pyrolysis of sample C, which has the worst chemical properties, gives the lowest environmental impact, since the solid fraction from this sample is the most effective adsorbent, achieving almost 100 % removal efficiency for the tested drugs. The findings suggest that pyrolysis of plastic-rich streams should not always be focused on the oil production, as it can yield other valuable products.

Energy Conversion and ManagementVol. 329
University of the Basque Country (ES)
Eusko Jaurlaritza, Euskal Herriko Unibertsitatea
Responsible consumption and production
Openalex Percentile: Top 4%
Recycling and Waste Management Techniques
6.98
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.