A Study on the Mechanism of the Precipitation-Induced Slope Instability of Colluvium

In this study, the evolution process of a landslide model under continuous rainfall conditions with a rainfall intensity of 30 mm/h is studied in depth based on an outdoor rainfall model test of a colluvial slope as the research material. The response law of pore water pressure and settlement amount is also obtained, and the influence of bedrock inclination angle on the development and deformation failure of the colluvial landslide is discussed. When the dip angle of the bedrock is 40°, it is prone to sudden slip-type landslides, and the evolution process is as follows: tensile cracks appear at the trailing edge, and these cracks continue to increase, leading to overall sliding. When the bedrock dip angle is 30°, traction landslides are prone to occur, and the evolution process is as follows: there is sliding at the foot of the slope, tensile cracks appear in the middle, sliding occurs in the middle, and tensile cracks appear in the upper part, leading to overall sliding. Before the landslide starts, the pore water pressure rises significantly. In the process of landslide evolution, the fine particles move to the foot of the slope with the rainwater, and the larger the angle of the slope, the greater the number of fine particles that accumulate at the foot of the slope, and the higher the elevation and the larger the scale of the trailing edge of the sliding body during sliding.