Study on the Law of Mine Pressure Manifestation in Three-Soft Coal Seam Isolated Working Face

The isolated working face is significantly impacted by the adjacent goaf and the mining activities of the working face itself, causing the overlying rock layers above the working face to exhibit far more intense activity compared to an ordinary working face. The stress levels are high, and the surrounding rock suffers severe damage, posing serious challenges to the safe and efficient extraction of the working face. Improving the service life of the retreating roadway in an isolated working face is a pressing technical issue that coal mining companies must address. Focusing on the characteristics of the strata and mining conditions of the 8213 isolated working face in the Yanjiahe Coal Mine, which features a three-soft coal seam, a combination of field investigation, theoretical analysis, on-site monitoring, and numerical simulation methods was employed. This approach aimed to analyze the fundamental laws of mine pressure behavior in the three-soft coal seam isolated working face as well as the deformation and failure mechanisms of the surrounding rock in the retreating roadway. Using elastic thin plate theory, it was determined that the basic roof periodic fracture step of the 8213 isolated face in the Yanjiahe Coal Mine is approximately 23 m. Field mine pressure monitoring on the 8213 isolated working face revealed that during non-periodic pressure events, the support resistance of the working face generally fluctuated stably below the rated working resistance. When the basic roof collapsed, the average working resistance of the support showed a significant increase with periodic pressure steps ranging from 16 to 27 m and an average of 22 m. Numerical simulations were further used to analyze the changes in stress and the plastic zone of the overlying rock on the 8213 isolated working face, clarifying the mechanism by which instability in the overlying rock structure leads to incidents. This analysis provides theoretical support for the safe mining of isolated working faces.