Design of a Board-Level Integrated Multi-Channel Radio Frequency Source for the Transportable 40Ca+ Ion Optical Clock

As one of the most precise timekeeping instruments ever developed, the optical clock will be used as the measuring equipment for the next generation of second definition. The demand for the miniaturization of optical clocks is progressively urgent. In this paper, a multi-channel radio frequency (RF) module with a 20% volume of the commercial module is designed and implemented for the transportable ⁴⁰Ca⁺ ion optical clock. Based on the double-crystal oscillator interlocking technique, a 1 GHz low-phase noise reference source is developed for direct digital synthesis. Through the simulation and optimization of the signal link design, the frequency range of the low phase-noise RF signal can reach 0-400 MHz with a 4 μHz resolution. Through two-stage power amplifying with different kinds of filters, it can achieve an output power of up to +33 dBm (2 W) at 100 MHz with a 25 dB phase noise lower than the commercial module at 1 Hz, and its third harmonic suppression ratio has been reduced by more than 20 dB at the frequency point of 300 MHz. This multi-channel RF module is used for the power stability and timing control test of a 729 nm clock laser to meet the requirements of the transportable ⁴⁰Ca⁺ optical clock. Additionally, this module can also be applied to other quantum systems such as the quantum absolute gravimeter, quantum gyroscopes, and quantum computers.