Thermal boundary layer modelling for bubbles at saturation: A posteriori analysis

This study investigates different temperature and flux coupling strategies in Direct Numerical Simulations (DNS) of bubbles at saturation, employing local one-dimensional thermal boundary layer sub-resolutions. Specifically, a laminar radial sub-resolution (LRS) near the interface is employed to address challenges in capturing sharp temperature variations, which is crucial for liquid–vapour heat transfer correlations. State-of-the-art techniques use analytical profiles to capture very thin boundary layers around single-rising objects for very high Prandtl or Schmidt numbers. The original approach proposed in Grosso et al. (2024) relies on a more general embedded sub-resolution still applicable at low Prandtl numbers and coarse grids. To accurately integrate the sub-layer variations into the CFD grid, the literature recommends using the sub-grid profiles to evaluate the Eulerian face fluxes instead of correcting cell temperature. From experience, it avoids excessive flux leakage from the sub-layer region at high Prandtl numbers. The present article investigates these coupling methods while proposing adaptations for thick boundary layers and very coarse grids in the context of LRS. Two test cases, pure diffusion acting around a sphere and a single rising bubble configuration, are explored, measuring heat flux at the interface and its transmission to the fluid domain serving as figures of merit for each coupling method. In low Prandtl bubbly flows ( P r l ≤ 5 ), and on coarse and affordable grids ( < 20 cells per bubble diameter), temperature coupling is found to be more stable though not conservative compared to flux coupling approaches. On the other hand, classical flux coupling strategies can exhibit artefacts and introduce potential instabilities with LRS. To overcome such problems, an improved local flux balance approach is proposed, demonstrating both robustness and efficiency in predicting and transmitting interfacial flux across the tested thermal layers’ thickness ranges. • An advanced radial sub-resolution technique has been implemented in a Front-Tracking framework. • Novel temperature and thermal flux coupling strategies are conceptualised and exposed. • Predictions of the Nusselt number using the sub-resolution method are notably enhanced on very coarse grids. • A comprehensive analysis is conducted to evaluate the conservative flux transmission for each coupling method.