Photocatalysis-Assisted Water Remediation Using Porous Nanowire Foams

Deployment of photocatalysis for water disinfection necessitates engineering the process kinetics and achieving the complete recovery of the photocatalyst following the remediation of water. The recovery of the photocatalysts, especially nanostructured photocatalysts, remains a challenge, as indicated by a previous study by our group where only 57% of TiO2 nanowires were recovered by gravity-assisted settling and sedimentation from water after its photocatalysis-assisted E. coli inactivation. To overcome this challenge, a novel method involving the use of photocatalysts in the form of porous foams is developed and presented. Use of TiO2 nanowire foams led to a 2–3-log reduction of E. coli in a span of 180 min when ultraviolet-A (UV-A) light was employed for photoactivation, similar to that observed previously by our group. More importantly, the photocatalyst foams were easily recoverable from water via mechanical separation using tweezers, which in this study led to a recovery of 98–99% of the TiO2 nanowire photocatalysts. This strategy allows for further optimization of both the process kinetics and the total amount of photocatalysts needed for water remediation through optimization of the porosities and the geometries of the foams and ensuring that all the photocatalyst surfaces remain accessible to both the pollutants and light.