Flow and Corrosion Analysis of CO2 Injection Wells: A Case Study of the Changqing Oilfield CCUS Project

In carbon dioxide capture, utilization and storage (CCUS) technology, CO2 flooding and storage is currently the most effective geological storage method and the flow law of the gas injection wellbore is the key to achieving safe and efficient CO2 injection. The existing wellbore flow model lacks research on the corrosion law. To this end, this paper established a gas injection wellbore flow-heat transfer-corrosion coupling model based on the actual situation of Huang 3 District of the CCUS Demonstration Base of Changqing Oilfield. The field measured data verification showed that the relative average error of the model in predicting pressure and temperature was less than 7.5% and the R2 of the predicted value and the measured value was greater than 0.99. The model was used for sensitivity analysis to evaluate the effects of different gas injection temperatures (15–55 °C), pressures (15–55 MPa), displacements (10–500 t/d) and CO2 contents (50–100%) on wellbore temperature, pressure and corrosion rate, and the wellbore flow law under different gas injection conditions was clarified. The results show that the wellbore temperature, pressure and corrosion rate are significantly affected by gas injection parameters. The wellbore temperature increases with the increase of gas injection temperature and decreases with the increase of gas injection displacement. The wellbore pressure is positively correlated with the gas injection pressure and CO2 content and the gas injection temperature and displacement have little effect on the pressure. The corrosion rate increases with the increase of gas injection temperature and displacement and decreases with the increase of gas injection pressure. In the wellbore, it shows a trend of first increasing and then decreasing with depth. The wellbore corrosion rate is affected by many factors. Reasonable adjustment of gas injection parameters (lowering temperature, increasing pressure, controlling displacement and CO2 content) can effectively slow down the wellbore corrosion loss. The research results can provide a theoretical basis for the optimization of gas injection system.