NVH Optimization of Mounts for Reduction of Structure Borne Motor and Road Noise in Electric Vehicle

<div class="section abstract"><div class="htmlview paragraph">Due to stringent emission norms, all OEMs are shifting focus from Internal combustion engine (ICE) to Electric vehicle (EV). NVH refinement of EVs is challenging due to less background noise in EVs in comparison with ICE vehicles.</div><div class="htmlview paragraph">Motor whine noise is perceived inside cabin till the speed of 20 kmph. Vehicle is powered by electric powertrain (EPT). Electric powertrain is connected to the subframe with the help of three powertrain mounts. Subframe is connected to the body with the help of four mounts. With the help of Transfer Path Analysis (TPA), it is identified that the noise is structure borne and the dominant path is identified. By optimizing the stiffness of the EPT mounts, the structure borne noise levels are reduced. But reducing the stiffness of EPT mount deteriorated the road noise levels. The reason behind deterioration of road noise is investigated. The performance of double isolation of EPT is compared with single isolation of EPT with respect to both road and motor noise. Modal criteria which needs to be considered for EPT and subframe mount development in design stage with respect to road noise and structure borne motor noise is also discussed.</div></div>