Finite Element Modeling of Dynamic Response of RPC Columns and Frames Under Coupled Fire and Explosion

Reactive powder concrete (RPC) is widely used in ultra-high-rise buildings, hydropower stations, bridges, and other important infrastructures. To study the dynamic response and damage characteristics of RPC columns and frames considering coupled fire and explosions, an analytical model of RPC columns and frames with coupled fire and explosions was established by using ABAQUS (2021) finite element software. The dynamic response and damage degree of RPC columns under coupled fire and explosions were investigated to reveal the influence laws of parameters such as cross-section size, axial compression ratio, reinforcement rate, and fire duration on the dynamic response of RPC columns at high temperatures. The dynamic response of the frame structure was analyzed when the explosion load was applied to the bottom corner columns, side columns, and top beams, respectively. The results show that the fire severely weakened the blast resistance of RPC columns; the maximum mid-span deformation and residual deformation of RPC columns decreased with the increase in cross-section size and longitudinal bar reinforcement ratio and increased with the increase in fire duration and axial compression ratio. When the explosion load was applied to the corner columns of the bottom floor of the frame, the bottom corner columns were almost completely destroyed, and there was a significant risk of the structure collapsing. Based on the results of the data analysis, a method to enhance the explosion resistance of RC frame structures using RPC materials at high temperatures is proposed.