Abrasive Flow Material Removal Mechanism Under Multifield Coupling and the Polishing Method for Complex Titanium Alloy Surfaces

This study addresses the challenge of uneven surface quality on the concave and convex regions during the precision machining of titanium alloy thin-walled complex curved components. An electrostatic field-controlled liquid metal-abrasive flow polishing method is proposed, which is examined through both numerical simulations and experimental investigations. Initially, a material removal model for the liquid metal-abrasive flow under electrostatic field control is developed, with computational fluid dynamics (CFD) and discrete phase models employed for the numerical simulations. Subsequently, the motion characteristics of liquid metal droplets under varying amplitudes of alternating electric fields are experimentally observed within the processing channel. This serves to validate the effectiveness of the proposed method in enhancing surface quality uniformity across the concave and convex regions of titanium alloy thin-walled complex curved components. Our results demonstrate that by controlling the distribution of the electric field in regions with varying flow strengths, the roughness differences between the concave and convex surfaces of the workpiece are reduced to varying degrees. Specifically, in the experimental group subjected to a 24 V alternating electric field, the roughness difference is minimized to 58 nm, representing a 44% reduction compared to conventional abrasive flow polishing. These findings indicate that the proposed electrostatic field-controlled liquid metal-abrasive flow polishing method significantly enhances the uniformity of surface polishing on concave and convex areas of titanium alloy thin-walled complex curved components.