Protolytic Reactions at Electrified TiO2 P25 Interface: Quantitative and Thermodynamic Characterization

Protolytic reactions on the surface of a titania photocatalyst (TiO₂ P25 containing chlorine impurities) were studied using potentiometric and calorimetric acid-base titration. The impurity was removed by either washing or heat treatment. The efficiency of purification was tested by chlorine (TOX) analysis and acid-base titration. Common intersection points of -0.023 and -0.021 mmol/g were obtained for the original and 400 °C heat-treated samples, which are in good agreement with the measured TOX value of 28 mmol/kg. The point of zero charge of the purified sample was determined to be 6.50. Titration data were fitted to simulate protolytic reactions during isothermal calorimetric titrations of purified titania. The evolved heat was measured, and data points were corrected with the heat of mixing and neutralization. The quantity of charged surface species formed in each step of titration was calculated using the parameters from the constant capacitance model fit. The partial molar enthalpy values of the exothermic and endothermic processes of surface protonation (ΔH_pr, -17.47 to -16.10 kJ/mol) and deprotonation (ΔH_depr, 32.53 to 27.08 kJ/mol) depend slightly on the ionic strength of suspensions. The average standard enthalpy of one proton transfer reaction is -23.54 ± 1.75 kJ/mol, which is consistent with the literature.