Phase noise measurement by zero-crossing analysis with a double recorder setup in the radio frequency range

The phase noise of low-noise oscillators is conventionally measured by the cross-spectrum method (CSM), which has a complicated setup. We developed an alternative method called zero-crossing analysis with a double recorder setup (ZCA-DRS) that has a much simpler configuration, which we previously demonstrated to measure phase noise in the audible frequency range. In this study, we conducted experiments using ZCA-DRS to measure phase noise in the radio frequency range. A temperature-compensated crystal oscillator was used to generate a periodic signal at 27 MHz. The results demonstrated that the obtained single-sideband spectrum was almost the same as that obtained by CSM. The measurement sensitivity was limited by the jitter of the internal clock and the noise of the analog-to-digital converter. Thus, ZCA-DRS can be used as an alternative to CSM for phase noise measurement in the radio frequency range.