A Skeleton-Based Method of Root System 3D Reconstruction and Phenotypic Parameter Measurement from Multi-View Image Sequence

The phenotypic parameters of root systems are vital in reflecting the influence of genes and the environment on plants, and three-dimensional (3D) reconstruction is an important method for obtaining phenotypic parameters. Based on the characteristics of root systems, being featureless, thin structures, this study proposed a skeleton-based 3D reconstruction and phenotypic parameter measurement method for root systems using multi-view images. An image acquisition system was designed to collect multi-view images for root system. The input images were binarized by the proposed OTSU-based adaptive threshold segmentation method. Vid2Curve was adopted to realize the 3D reconstruction of root systems and calibration objects, which was divided into four steps: skeleton curve extraction, initialization, skeleton curve estimation, and surface reconstruction. Then, to extract phenotypic parameters, a scale alignment method based on the skeleton was realized using DBSCAN and RANSAC. Furthermore, a small-sized root system point completion algorithm was proposed to achieve more complete root system 3D models. Based on the above-mentioned methods, a total of 30 root samples of three species were tested. The results showed that the proposed method achieved a skeleton projection error of 0.570 pixels and a surface projection error of 0.468 pixels. Root number measurement achieved a precision of 0.97 and a recall of 0.96, and root length measurement achieved an MAE of 1.06 cm, an MAPE of 2.37%, an RMSE of 1.35 cm, and an R2 of 0.99. The whole process of reconstruction in the experiment was very fast, taking a maximum of 4.07 min. With high accuracy and high speed, the proposed methods make it possible to obtain the root phenotypic parameters quickly and accurately and promote the study of root phenotyping.