Preparation and Hg0 Removal Performance of MIL-101(Cr)-Derived Carbon Matrix Composites

The temperature at which pollutants are treated varies across different industrial processes. To address the high cost of raw materials for MOFs and the low efficiency of Hg⁰ removal in low-temperature environments, a series of MIL-101(Cr)-derived carbon matrix composite materials were prepared by combining MIL-101(Cr) with biomass and multiple metals. These materials were synthesized through a sol-gel method followed by carbonization. This study investigates the effects of composite ratios and adsorption temperatures on Hg⁰ removal, utilizing XRD, BET, and other characterization techniques to elucidate the mercury-removal mechanism of the PDC-MIL composite materials. The results indicate that MIL101(Cr) significantly influences the formation of the gel skeleton. When the composite ratio of MIL-101(Cr) to biomass is 1:1, the material exhibits an optimal pore structure, leading to high Hg⁰ removal efficiency over a wide temperature range. The removal of Hg⁰ by these composite materials involves both physical adsorption and chemisorption. Low temperatures favor physical adsorption, while high temperatures promote chemisorption. The sol-gel composite method facilitates cross-linking polymerization between MOFs and SiO₂, enabling better pore structure connectivity with biomass and MOFs, thereby optimizing the poor pore structure observed after pyrolysis. Consequently, the improved pore structure enhances physical adsorption at low temperatures, mitigates desorption at high temperatures, and increases the contact probability of Hg⁰ with active sites within the pores, significantly improving the mercury-removal ability of the material across a broad temperature range.