Effects of Graphene Nanoplatelets and Nanosized Al4C3 Formation on the Wear Properties of Hot Extruded Al-Based Nanocomposites

This study investigates the influence of graphene nanoplatelets (GNPs) and the formation of nanosized Al4C3 on the tribological performance of hot extruded aluminum-based nanocomposites. Al/GNP nanocomposites with varying GNP contents (0, 0.1, 0.5, and 1.1 wt.%) were fabricated through powder metallurgy, including ball milling, compaction, and hot extrusion at 500 °C, which was designed to facilitate the formation of nanosized carbides during the extrusion process. The effect of GNPs and nanosized carbides on the tribological properties of the composites was evaluated using dry friction pin-on-disk tests to assess wear resistance and the coefficient of friction (COF). Microstructural analyses using scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed the uniform distribution of GNPs and the formation of nanosized Al4C3 in the samples. Incorporating 0.1 wt.% GNPs resulted in the lowest wear mass loss (1.40 mg) while maintaining a stable COF (0.52), attributed to enhanced lubrication and load transfer. Although a higher GNP content (1.1 wt.%) resulted in increased wear due to agglomeration, the nanocomposite still demonstrated superior wear resistance compared to the unreinforced aluminum matrix. These findings underscore the potential of combining nanotechnology with precise processing techniques to enhance the wear and friction properties of aluminum-based composites.