Laser-Induced Breakdown Spectroscopy Using 2D Structured Light: A Case of Spectral Signal Enhancement on Metal Samples

Laser-induced breakdown spectroscopy (LIBS), an elemental detection technique with great potential, faces many problems mainly caused by the nonideal plasma properties in the detection window. The 2D laser energy distribution on the sample surface has a crucial impact on the plasma properties and spectral emission. However, relevant studies are still limited, lacking a good degree of freedom (DOF) to systematically explore its influence. In this work, 2D structured light was generated by using a spatial light modulator (SLM). Various focal patterns with different cross-section areas were tested using metal samples so that the effects of the focal spot structure and cross-section area could be separated. The arrow-target and anticone of 200 μm diameter resulted in a line enhancement factor of more than 3 for a pure aluminum sample and a factor of about 6 for the pure copper sample over that without beam modulation. A significant improvement in the signal-to-noise ratio and a reduction in the limit of detection (LOD) of Cr, Mn, Si, Cu, and Al by a factor of about 6 were also achieved with the bearing steel sample. To better understand the mechanism behind such improvements, time-resolved spectra were measured, from which the electron density and plasma temperature evolution were calculated. The results showed that with anticone and arrow-target patterns, the electron density was increased by more than 50%, while the plasma temperature varied less than 500 K, suggesting an evident ablation enhancement. The fast images of plasma self-emission proved that the laser energy distribution substantially influenced the morphology of the plasma plume. The plasma cores produced by the anticone and arrow-target focal patterns were more compact after the expansion and cooling process, which could reduce the mixing of plasma plumes and ambient air. Thus, with the first application of SLM in LIBS, focal spot structures of micrometer resolution could be rationally designed and generated with a high DOF. Substantial spectral signal enhancement and a much lower LOD were achieved. This study provides new insights into the role of focal patterns in plasma properties, suggesting the future possibility of plasma control using structured light.

Authors

Institutions

Publication Details

Journal
Analytical Chemistry
Published
2025-02-04
DOI
https://doi.org/10.1021/acs.analchem.4c04055
Citations
6
Primary Topic
Laser-induced spectroscopy and plasma
Type
article
Field-Weighted Citation Impact
5.18
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Laser-Induced Breakdown Spectroscopy Using 2D Structured Light: A Case of Spectral Signal Enhancement on Metal Samples

Wendong Wu, Ziqing Zhao, Haimeng Peng, Shu Chai et al.
6 citations
Analytical Chemistry
Laser-induced spectroscopy and plasma
5.18
article

Laser-Induced Breakdown Spectroscopy Using 2D Structured Light: A Case of Spectral Signal Enhancement on Metal Samples

Wendong Wu, Ziqing Zhao, Haimeng Peng, Shu Chai, Jie Ren, Aochen Li
article en
6 citations

Abstract

Laser-induced breakdown spectroscopy (LIBS), an elemental detection technique with great potential, faces many problems mainly caused by the nonideal plasma properties in the detection window. The 2D laser energy distribution on the sample surface has a crucial impact on the plasma properties and spectral emission. However, relevant studies are still limited, lacking a good degree of freedom (DOF) to systematically explore its influence. In this work, 2D structured light was generated by using a spatial light modulator (SLM). Various focal patterns with different cross-section areas were tested using metal samples so that the effects of the focal spot structure and cross-section area could be separated. The arrow-target and anticone of 200 μm diameter resulted in a line enhancement factor of more than 3 for a pure aluminum sample and a factor of about 6 for the pure copper sample over that without beam modulation. A significant improvement in the signal-to-noise ratio and a reduction in the limit of detection (LOD) of Cr, Mn, Si, Cu, and Al by a factor of about 6 were also achieved with the bearing steel sample. To better understand the mechanism behind such improvements, time-resolved spectra were measured, from which the electron density and plasma temperature evolution were calculated. The results showed that with anticone and arrow-target patterns, the electron density was increased by more than 50%, while the plasma temperature varied less than 500 K, suggesting an evident ablation enhancement. The fast images of plasma self-emission proved that the laser energy distribution substantially influenced the morphology of the plasma plume. The plasma cores produced by the anticone and arrow-target focal patterns were more compact after the expansion and cooling process, which could reduce the mixing of plasma plumes and ambient air. Thus, with the first application of SLM in LIBS, focal spot structures of micrometer resolution could be rationally designed and generated with a high DOF. Substantial spectral signal enhancement and a much lower LOD were achieved. This study provides new insights into the role of focal patterns in plasma properties, suggesting the future possibility of plasma control using structured light.

Analytical ChemistryVol. 97(6)
Shanghai Jiao Tong University (CN), Institute of Thermal Physics (RU), Engineering (Italy) (IT)
Openalex Percentile: Top 5%
Laser-induced spectroscopy and plasma
5.18
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.