Impact of NiTi Shape Memory Alloy Substrate Phase Transitions Induced by Extreme Temperature Variations on the Tribological Properties of TiN Thin Films

NiTi alloys and thin film/NiTi composites are extensively utilized in frictional environments, particularly those experiencing extreme temperature fluctuations. Current studies mainly focus on preparing wear-resistant films on NiTi alloy surfaces but neglect the potential impact of temperature-induced phase transitions in the NiTi substrate on thin films’ performance. This study examines the effect of NiTi alloy phase transitions, induced by extreme temperature variations, on the tribological properties of TiN thin films on NiTi substrates. TiN films (1 μm thick) were deposited on NiTi alloy surfaces using magnetron sputtering technology. The transition of the main phase in the NiTi substrate between the R phase and the B19′ phase was achieved via liquid nitrogen cooling (−196 °C) and water bath heating (90 °C). XRD, EDS, SEM, and tribological tests analyzed the phase structure, elemental composition, micromorphology, and tribological behavior. Fatigue wear was identified as the predominant wear mechanism for the TiN films, with minor contributions from oxidative and abrasive wear. Phase transition from the R phase to the B19′ phase in the NiTi substrate induced by temperature change couls reduce the wear rate of the TiN film by up to 41.97% and decrease the friction coefficient from about 0.45 to about 0.25. Furthermore, the shape memory effect of the NiTi alloy substrate, caused by B19′ → B2 phase transition, resulted in the recovery of the TiN thin film wear track depth from 920 nm to 550 nm, manifesting a “self-healing” phenomenon. The results in this study are important and necessary for the provision of thin film/NiTi composites in frictional environments.