Optimizing the Dealkalization Process of Red Mud: Controlling Calcium Compounds to Improve Solid–Liquid Separation Performance

The acid neutralization process is widely recognized for its effectiveness in the dealkalization of red mud, and it faces challenges in solid–liquid separation due to the formation of numerous colloidal components. This study investigated the impact of calcium-containing compounds (CaO, CaCl2, CaCO3, and CaSO4) on the solid–liquid separation and the dealkalization efficiency of red mud during the dealkalization process. The sodium leaching efficiency of the red mud reached 95.6% when the red mud was reacted with 8% of sulfuric acid for 10 min with a stirring speed and liquid to solid ratio of 700 r/min and 5:1, respectively. The replacement of sulfuric acid using simulated waste acid reached similar sodium leaching efficiency. However, the filtration rate of red mud becomes exceedingly sluggish using sulfuric acid or simulated waste acid. Adding calcium-containing compounds significantly augments the efficacy of solid–liquid separation in red mud. With a mass content of 2% for CaO or 8% for CaCl2, the filtration speed experienced a remarkable fivefold and ninefold increase, respectively. Furthermore, a simplification in the composition was observed within the leaching solution derived from red mud, thereby creating favorable conditions for the extraction of sodium. The influence mechanism was investigated with X-ray diffraction, inductively coupled plasma analysis, and scanning electron microscopy. The addition of calcium compounds led to the formation of calcium silicate and iron silicate in the leaching residue, inhibiting the generation of colloidal substances, such as silica gel. Additionally, these compounds increased the size of red mud particles, facilitating the solid–liquid separation process. This study provides valuable technical insights for the dealkalization of red mud.