Using One-Part Geopolymer in Stabilizing High-Water-Content Soft Clay: Towards an Eco-Friendly and Cost-Effective Solution

To achieve environmental and economic goals in ground improvement, a one-part geopolymer (OPG), synthesized from binary precursors (fly ash [FA] and granulated blast furnace slag [GGBFS]) and a solid activator (solid sodium silicate [NS]), was used to replace ordinary Portland cement (OPC) for stabilizing high-water-content soft clay. The effects of different initial water content (50%, 80%, 100%, and 120%) and various OPG binder content (10%, 20%, 30%, and 40%) on the strength development of the OPG-stabilized soft clay were investigated through unconfined compressive strength (UCS) and unconsolidated undrained (UU) triaxial tests. Additionally, the microstructure evolution and the distribution of pores in the OPG-stabilized soft clay were examined by the utilization of mercury intrusion porosimetry (MIP) and scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS) techniques, respectively. The life cycle assessment (LCA) methodology was then used to analyze the environmental and economic advantages of employing an OPG binder for soil stabilization. It was revealed that the optimal content of OPG binder was contingent upon the water content of soft clay, with variations in requirements for strength development. Specifically, for soft clay not demanding early strength, a maximum binder content of 20% is proposed. Conversely, for soft clay that necessitated rapid strength gain, the OPG binder content escalated with increasing water content of the soft clay, in which soft clays with different water contents had corresponding required amounts of OPG binder. For soil with water content ranging from 50% to 80%, the recommended OPG binder content is 20%. While for soil with 100% and 120% water content, the designed OPG binder content is suggested to be 30% and 40%, respectively. The environmental assessment demonstrated that the utilization of OPG as a binder for the stabilization of soft clay reduces costs and carbon emissions in comparison to OPC. The present study provides substantial theoretical validation for the utilization of OPG as a novel binder to stabilize soft clay with elevated water content, which holds promise as an eco-friendly and cost-effective solution in ground improvement.

Authors

Institutions

Publication Details

Journal
Buildings
Published
2025-02-03
DOI
https://doi.org/10.3390/buildings15030477
Citations
4
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
3.81

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Using One-Part Geopolymer in Stabilizing High-Water-Content Soft Clay: Towards an Eco-Friendly and Cost-Effective Solution

Fujun Niu, Jun Wu, Chuanqin Yao, Shuo Li et al.
4 citations
Buildings
Concrete and Cement Materials Research
3.81
article

Using One-Part Geopolymer in Stabilizing High-Water-Content Soft Clay: Towards an Eco-Friendly and Cost-Effective Solution

Fujun Niu, Jun Wu, Chuanqin Yao, Shuo Li, Zihan Zhou, Guo Hu
article en
4 citations

Abstract

To achieve environmental and economic goals in ground improvement, a one-part geopolymer (OPG), synthesized from binary precursors (fly ash [FA] and granulated blast furnace slag [GGBFS]) and a solid activator (solid sodium silicate [NS]), was used to replace ordinary Portland cement (OPC) for stabilizing high-water-content soft clay. The effects of different initial water content (50%, 80%, 100%, and 120%) and various OPG binder content (10%, 20%, 30%, and 40%) on the strength development of the OPG-stabilized soft clay were investigated through unconfined compressive strength (UCS) and unconsolidated undrained (UU) triaxial tests. Additionally, the microstructure evolution and the distribution of pores in the OPG-stabilized soft clay were examined by the utilization of mercury intrusion porosimetry (MIP) and scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS) techniques, respectively. The life cycle assessment (LCA) methodology was then used to analyze the environmental and economic advantages of employing an OPG binder for soil stabilization. It was revealed that the optimal content of OPG binder was contingent upon the water content of soft clay, with variations in requirements for strength development. Specifically, for soft clay not demanding early strength, a maximum binder content of 20% is proposed. Conversely, for soft clay that necessitated rapid strength gain, the OPG binder content escalated with increasing water content of the soft clay, in which soft clays with different water contents had corresponding required amounts of OPG binder. For soil with water content ranging from 50% to 80%, the recommended OPG binder content is 20%. While for soil with 100% and 120% water content, the designed OPG binder content is suggested to be 30% and 40%, respectively. The environmental assessment demonstrated that the utilization of OPG as a binder for the stabilization of soft clay reduces costs and carbon emissions in comparison to OPC. The present study provides substantial theoretical validation for the utilization of OPG as a novel binder to stabilize soft clay with elevated water content, which holds promise as an eco-friendly and cost-effective solution in ground improvement.

BuildingsVol. 15(3)
Shanghai University of Engineering Science (CN), Shanghai Normal University (CN)
National Natural Science Foundation of China
Openalex Percentile: Top 8%
Concrete and Cement Materials Research
3.81
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.