Interfacial Adsorption Interactions of Dyes and Chitosan/Activated Carbon@Curcumin Derivatives in Single-Component and Binary Solutions

The remediation of wastewaters contaminated with dyes (discharged mainly from industry) is very important for preserving environmental quality and human health. In this study, a new composite chitosan (CS)-based adsorbent combined with activated carbon (AC) and curcumin (Cur) (abbreviated hereafter as CS/AC@Cur) in three different ratios (12.5%, 25%, and 50%) was synthesized for the removal of anionic [reactive black 5 (RB5)] and cationic [methylene blue (MB)] dyes in single-component or binary systems. The synthesized materials were completely characterized through Fourier transform infrared spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller analysis, and X-ray diffraction. Specifically, a decrease in the surface area of CS/AC@ was observed with the addition of curcumin, from 163 to 18 m<sup>2</sup>/g, for all CS/AC@Cur derivatives. In terms of the adsorption results, the optimal derivative for the removal of both RB5 and MB was found to be CS/AC@Cur50%, providing 93% removal at pH 2.0 ± 0.1 for RB5 and 54% removal at the optimum pH of 9.0 ± 0.1 due to electrostatic attractions. The Elovich and pseudo-second-order kinetic model, with a correlation coefficient <i>R</i><sup>2</sup> of >0.98, better tailored the results, indicating that adsorption was controlled by chemisorption. In addition, the Sips (Langmuir-Freundlich) isotherm model fitted better to the results, with calculated capacities of 338 and 307 mg/g for RB5 and MB, respectively. The thermodynamic analysis showed a spontaneous and endothermic procedure, with chemisorption as the main mechanism. Reuse experiments showed that the removal efficiency was retained at high levels, while stability studies revealed that the adsorbent retains its structural integrity, even at extreme pH values. Finally, the adsorption of RB5 and MB in a mixed solution was investigated, providing a competitive effect between the anionic and cationic dyes.

Authors

Institutions

Publication Details

Journal
Langmuir
Published
2025-01-27
DOI
https://doi.org/10.1021/acs.langmuir.4c04769
Citations
20
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
16.34

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Interfacial Adsorption Interactions of Dyes and Chitosan/Activated Carbon@Curcumin Derivatives in Single-Component and Binary Solutions

Ioannis A. Katsoyiannis, George Z. Kyzas, Ramonna I. Kosheleva, Athanasia K. Tolkou et al.
20 citations
Langmuir
Adsorption and biosorption for pollutant removal
16.34
article

Interfacial Adsorption Interactions of Dyes and Chitosan/Activated Carbon@Curcumin Derivatives in Single-Component and Binary Solutions

Ioannis A. Katsoyiannis, George Z. Kyzas, Ramonna I. Kosheleva, Athanasia K. Tolkou, Konstantinos N. Maroulas, Angeliki A. Kouzoutzoglou-Efremidou
article en
20 citations

Abstract

The remediation of wastewaters contaminated with dyes (discharged mainly from industry) is very important for preserving environmental quality and human health. In this study, a new composite chitosan (CS)-based adsorbent combined with activated carbon (AC) and curcumin (Cur) (abbreviated hereafter as CS/AC@Cur) in three different ratios (12.5%, 25%, and 50%) was synthesized for the removal of anionic [reactive black 5 (RB5)] and cationic [methylene blue (MB)] dyes in single-component or binary systems. The synthesized materials were completely characterized through Fourier transform infrared spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller analysis, and X-ray diffraction. Specifically, a decrease in the surface area of CS/AC@ was observed with the addition of curcumin, from 163 to 18 m<sup>2</sup>/g, for all CS/AC@Cur derivatives. In terms of the adsorption results, the optimal derivative for the removal of both RB5 and MB was found to be CS/AC@Cur50%, providing 93% removal at pH 2.0 ± 0.1 for RB5 and 54% removal at the optimum pH of 9.0 ± 0.1 due to electrostatic attractions. The Elovich and pseudo-second-order kinetic model, with a correlation coefficient <i>R</i><sup>2</sup> of >0.98, better tailored the results, indicating that adsorption was controlled by chemisorption. In addition, the Sips (Langmuir-Freundlich) isotherm model fitted better to the results, with calculated capacities of 338 and 307 mg/g for RB5 and MB, respectively. The thermodynamic analysis showed a spontaneous and endothermic procedure, with chemisorption as the main mechanism. Reuse experiments showed that the removal efficiency was retained at high levels, while stability studies revealed that the adsorbent retains its structural integrity, even at extreme pH values. Finally, the adsorption of RB5 and MB in a mixed solution was investigated, providing a competitive effect between the anionic and cationic dyes.

LangmuirVol. 41(5)
Democritus University of Thrace (GR), Aristotle University of Thessaloniki (GR)
Hellenic Academic Libraries Link
Openalex Percentile: Top 1%
Adsorption and biosorption for pollutant removal
16.34
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.