Change detection of slow-moving landslide with multi-source SBAS-InSAR and Light-U2Net

• An efficient Light-U 2 Net was constructed to identify Significant Deformation Zones. • Geometric measurements based change detection method was proposed to identify BCSMLs. • The proposed framework could update slow-moving landslide inventory automatically. • Relevant results provide practical reference for disaster prevention and mitigation. Interferometric Synthetic Aperture Radar (InSAR) techniques are commonly used approach for identifying Slow-moving Landslide (SML). However, most SML boundary identification with deep learning are based on single-source InSAR data, which cannot fully explore the dynamic process of destabilization, and are inefficient due to high model complexity. Meanwhile, research on automatic procession with multi-source InSAR data is few. To enhance efficiency in geohazard monitoring, this paper proposed an automatic framework for Boundary-Changed Slow-moving Landslide (BCSML) detection by integrating multi-source Small Baseline Subset InSAR (SBAS-InSAR), Convolutional Neural Network (CNN), and change detection methodologies. Firstly, surface deformation was estimated using multi-source SBAS-InSAR. Then, a novel and effective Light-U 2 Net was constructed with decreased complexity to identify Significant Deformation Zone (SDZ) and locate SML candidate. Finally, BCSMLs were identified using a change detection approach based on newly defined geometric measurements. Two study areas were selected to test the model’s performance: Zayu County and the Nu-Lancang River parallel flow (NLPF) area (in China). The proposed Light-U 2 Net model achieves high Precision (80.1 %), Recall (80.2 %), and F1-scores (80.1 %) in Zayu County. Additionally, the model’s complexity has reduced by 42.4 % without compromising identification accuracy compared to the original model. The pre-trained model was then applied to the NLPF area, and a total of 273 BCSMLs were detected, with 176 identified as expanding and 97 as shrinking. BCSML identification accuracy can reach to 90.47 %. The results have proved that the proposed framework with the Light-U 2 Net model is effective and practically potential in landslide disaster prevention.

Authors

Publication Details

Journal
International Journal of Applied Earth Observation and Geoinformation
Published
2025-01-27
DOI
https://doi.org/10.1016/j.jag.2025.104387
Citations
10
Primary Topic
Landslides and related hazards
Type
article
Field-Weighted Citation Impact
24.22
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Change detection of slow-moving landslide with multi-source SBAS-InSAR and Light-U2Net

Liang Zhang, Dongping Ming, Xiao Ling, Yan Li et al.
10 citations
International Journal of Applied Earth Observation and Geoinformation
Landslides and related hazards
24.22
article

Change detection of slow-moving landslide with multi-source SBAS-InSAR and Light-U2Net

Liang Zhang, Dongping Ming, Xiao Ling, Yan Li, Lu Xu, Jianao Cai, Yan Liu, Ningjie Liu, Mengyuan Zhu
article en
10 citations

Abstract

• An efficient Light-U 2 Net was constructed to identify Significant Deformation Zones. • Geometric measurements based change detection method was proposed to identify BCSMLs. • The proposed framework could update slow-moving landslide inventory automatically. • Relevant results provide practical reference for disaster prevention and mitigation. Interferometric Synthetic Aperture Radar (InSAR) techniques are commonly used approach for identifying Slow-moving Landslide (SML). However, most SML boundary identification with deep learning are based on single-source InSAR data, which cannot fully explore the dynamic process of destabilization, and are inefficient due to high model complexity. Meanwhile, research on automatic procession with multi-source InSAR data is few. To enhance efficiency in geohazard monitoring, this paper proposed an automatic framework for Boundary-Changed Slow-moving Landslide (BCSML) detection by integrating multi-source Small Baseline Subset InSAR (SBAS-InSAR), Convolutional Neural Network (CNN), and change detection methodologies. Firstly, surface deformation was estimated using multi-source SBAS-InSAR. Then, a novel and effective Light-U 2 Net was constructed with decreased complexity to identify Significant Deformation Zone (SDZ) and locate SML candidate. Finally, BCSMLs were identified using a change detection approach based on newly defined geometric measurements. Two study areas were selected to test the model’s performance: Zayu County and the Nu-Lancang River parallel flow (NLPF) area (in China). The proposed Light-U 2 Net model achieves high Precision (80.1 %), Recall (80.2 %), and F1-scores (80.1 %) in Zayu County. Additionally, the model’s complexity has reduced by 42.4 % without compromising identification accuracy compared to the original model. The pre-trained model was then applied to the NLPF area, and a total of 273 BCSMLs were detected, with 176 identified as expanding and 97 as shrinking. BCSML identification accuracy can reach to 90.47 %. The results have proved that the proposed framework with the Light-U 2 Net model is effective and practically potential in landslide disaster prevention.

International Journal of Applied Earth Observation and GeoinformationVol. 136
Climate action
Openalex Percentile: Top 1%
Landslides and related hazards
24.22
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.