Optimized Heat Treatment for Electron Beam Powder Bed Fusion Processed IN718: Correlating Microstructure, Texture, and Mechanical Properties

This study investigates the microstructure and mechanical properties of Inconel 718 (IN718) manufactured via electron beam melting (EBM). The EBM‐processed IN718 exhibits a unique grain structure with columnar grains along the build direction (BD) and equiaxed grains perpendicular to it. Contrary to typical solidification textures, the strongest texture intensities are observed for (110) and (111) orientations, attributed to in situ δ phase precipitation during high‐temperature processing. The microstructure notably lacks cellular structures common in additively manufactured materials, instead featuring δ phase formed through in‐situ aging. A tailored heat treatment strategy is developed to control δ phase precipitation at grain boundaries, mitigating grain boundary sliding (GBS). This treatment results in <100> texture and large columnar grains, leading to a twofold increase in yield strength compared to the as‐printed (AP) condition. Interestingly, the AP EBM IN718 shows no signs of dynamic strain aging (DSA), distinguishing it from conventionally processed IN718. This comprehensive analysis of microstructure, texture, and mechanical behavior provides valuable insights for optimizing EBM processing and heat treatment of IN718 for enhanced performance in high‐temperature applications.