Growth and Evolution Characteristics and Stability of Hydrate Deposit Bed at Interfaces in Water-Dominated Systems

As oil and gas fields continue to be developed, the level of produced water continues to rise. Unlike deposition mechanisms, such as wall adhesion in oil-dominated systems, the hydrate deposition mechanism in water-dominated systems is dominated by bedding deposition. Currently, there is no uniform conclusion about the growth and evolution of the hydrate bed in water-dominated systems. Therefore, to study the growth and evolution characteristics and stability of hydrate deposit bed growth at the gas–liquid interface in the gas–water system, hydrate generation and deposition experiments were carried out in this study using stirred reactors and a high-speed camera. The results show that the initial hydrate deposit bed at the gas–liquid interface is usually transformed by the hydrate film, and the hydrate particles in the liquid phase are continuously bedding deposits on the deposit bed, which makes the bed grow continuously. Peak bed growth rates existed during bed growth up to more than 0.15 mm/min. The peak bed growth rate is influenced by a combination of subcooling and shear rate, while the time of peak occurrence is mainly influenced by subcooling. When the hydrate volume fraction is between 1 and 3%, the hydrate lamellae may have a bilayer construction during the decrease. Based on the experimental results, a model for the growth and evolution mechanism of the hydrate bed at the gas–liquid interface and a model for the critical disturbance Reynolds number and critical breaking speed of the hydrate bed were established.