Fracture Toughness of Winding Carbon Plastics Based on Epoxy Matrices and Reinforced by Polysulfone Film

In this work, the fracture mechanism of winding carbon-fiber-reinforced plastics (CFRPs) based on epoxy matrices reinforced by polysulfone film was investigated. Two types of polymer matrices were used: epoxy oligomer (EO) cured by iso-methyltetrahydrophthalic anhydride (iso-MTHPA), and EO-modified polysulfone (PSU) with active diluent furfuryl glycidyl ether (FGE) cured by iso-MTHPA. At the winding stage, the reinforcing film was placed in the middle layer of the CFRP. The fracture toughness <i>G_IR</i> of the obtained CFRP was determined by the double-cantilever beam delamination method. Additionally, the effect of cyclic loading on the fracture toughness of CFRP reinforced with polysulfone film was investigated. It was shown that heterogeneous structures arising from the dissolution of the polysulfone film in the epoxy binder during the curing process increase the fracture toughness of CFRP from 0.5 kJ/m² to 1.2 kJ/m². Application of cyclic loads had little effect on the fracture toughness value. As a result of this study, it was revealed that the macrocrack propagates near the reinforcement layer along the diffusion zone, which has a phase organization of the type PSU matrix-EO dispersion.