Comparison of the Performance of Nonlinear Time-Dependent Constitutive Models Calibrated with Minimal Test Data Applied to an Epoxy Resin

Epoxy resins are extensively employed as adhesives and matrices in fibre-reinforced composites. As polymers, they possess a viscoelastic nature and are prone to creep and stress relaxation even at room temperature. This phenomenon is also responsible for time-dependent failure or creep fracture due to cumulative strain. Several constitutive equations have been used to describe the mechanical time-dependent response of polymers. These models have been proposed over the past six decades, with minimal direct and practical confrontation. Each model is associated with a specific application or research group. This work assesses the predictive performance of four distinct time-dependent constitutive models based on experimental data. The models were deemed sufficiently straightforward to be readily integrated into practical engineering analyses. A range of loading cases, encompassing constant strain rate, creep, and relaxation tests, were conducted on a commercial epoxy resin. Model parameter calibration was conducted with a minimum data set. The extrapolative predictive capacity of the models was evaluated for creep loading by extending the tests to five decades. The selected rheological models comprise two viscoelastic models based on Volterra-type integrals, as originally proposed by Schapery and Rabotnov; one viscoplastic model, as originally proposed by Norton and Bailey; and the Burger model, in which two springs and two dashpots are combined in a serial and parallel configuration. The number of model parameters does not correlate positively to superior performance, even if it is high. Overall, the models exhibited satisfactory predictive performance, displaying similar outcomes with some relevant differences during the unloading phases.