Spline Global MPPT with PID Controller Based on Levy Invasive Weed Technique for Renewable Energy Resources of Smart Homes

Renewable energy systems, particularly photovoltaic (PV) systems, have been played important role in the reducing carbon emissions. A primary concern in the field of photovoltaics (PV) based on the design of the maximum power point tracking (MPPT) is the capacity to accurately monitor power across many parameters in addition to ascertain the power production of solar cells or wind turbines and adjust the load to maximise power efficiency under varying weather conditions. On another hands, the hybrid smart system uses a wind catcher to reduce the amount of energy consumed by buildings from the grid, which is a historically significant architectural component for cross ventilation and passive cooling. This paper presents an updating of model that proposes improvements to the regulation of Spline MPPT with tuning PID controller by using Levy Invasive Weed optimization (LIWO)technique. A rapid, accurate, and straightforward approach for determining the (MPPT) of PV systems under consistent irradiation and partial shade, as well as wind turbines, is presented using the Spline- MPPT technique. The model of this paper employs LIWO in conjunction with a PID controller to improve the selection of PID gains. Moreover, is applied to generate the optimal values of duty cycle of the model. The comprehensive system design depicted has been simulated using MATLAB Simulink to verify the functionality of the system. The model has attained an accuracy of 93%. The outcomes of this model contribute greatly to our understanding of the suitability and efficacy of both AI and traditional MPPT controllers. This modeling will be beneficial to the renewable energy industry.