Small Signal Stability Enhancement Of Power System Using Adaptive Control Based Power System Stabilizer

Power systems are subjected to low frequency disturbances that might cause loss of synchronism and an eventual breakdown of entire system. The oscillations, which are typically in the frequency range of 0.2 to 3.0 Hz, might be excited by the disturbances in the system or, in some cases, might even build up spontaneously. These oscillations limit the power transmission capability of a network and, sometimes, even cause a loss of synchronism and an eventual breakdown of the entire system. For this purpose, Power system stabilizers (PSS) are used to generate supplementary control signals for the excitation system in order to damp these low frequency power system oscillations. The use of power system stabilizers has become very common in operation of large electric power systems. The conventional PSS which uses lead-lag compensation, where gain settings designed for specific operating conditions, is giving poor performance under different loading conditions. The constantly changing nature of power system makes the design of CPSS a difficult task. Therefore, it is very difficult to design a stabilizer that could present good performance in all operating points of electric power systems. To overcome the drawback of conventional power system stabilizer (CPSS).In an attempt to cover a wide range of operating conditions, adaptive control based technique has been suggested as a possible solution to overcome the above problem, thereby using this technique complex system mathematical model can be avoided, while giving good performance under different operating conditions