Methodology for Calculating the Hydrogen Isotope Inventory in Tritium Fuel Cycle Systems of the DEMO-FNS Tokamak

The applied technologies for handling tritium and the efficiency of its use in the fuel cycle of a fusion facility affect the start-up tritium inventory, the possibility of tritium self-sufficiency, etc. These parameters largely determine the cost of the facility, its efficiency, and safety during operation. Formation of the conceptual configuration of the fuel cycle, calculation of the tritium inventory in its systems, and determination of the scope for further development are important problems in facility design. In order to calculate the flows of fuel components and tritium inventory in the fuel cycle (FC) of a tokamak-based fusion neutron source, the FC-FNS code developed at the Kurchatov Institute has been used since 2013. It implements the possibility of calculating the number of hydrogen isotopes contained in different FC systems. The article describes the current state of research on modeling the flow of fuel components in FC systems of the tokamak with a tritium-breeding blanket, presents simplified schemes of FC systems, and describes the principles of their operation and the methodology for calculating the inventory of hydrogen isotopes in them. It is substantiated that the number of fuel components in the facility will be primarily determined by fuel cycle technologies, which, in turn, depend on plasma parameters and scenarios of facility operation. It is shown that, for the DEMO-FNS project with a fusion power of 40 MW, which corresponds to the combustion of 7 × 10–5 g/s of tritium, the startup tritium inventory will be 400–430 g with a circulating fuel flow through the facility chamber of up to 0.1 g/s. Increasing fuel flows through the injection, hydrogen isotope separation, and some other DEMO-FNS systems, if convective edge-localized modes (ELMs) are taken into account, will lead to an increase in the operational tritium inventory in the fuel cycle up to 500 g. If there is a tritium-breeding blanket in the facility, tritium inventory in it (including the long-term storage) will be no more than 800 g.

Authors

Institutions

Publication Details

Journal
Physics of Atomic Nuclei
Published
2024-12-01
DOI
https://doi.org/10.1134/s1063778824070019
Citations
3
Primary Topic
Magnetic confinement fusion research
Type
article
Field-Weighted Citation Impact
1.98
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Methodology for Calculating the Hydrogen Isotope Inventory in Tritium Fuel Cycle Systems of the DEMO-FNS Tokamak

S.S. Ananyev, Б. В. Иванов
3 citations
Physics of Atomic Nuclei
Magnetic confinement fusion research
1.98
article

Methodology for Calculating the Hydrogen Isotope Inventory in Tritium Fuel Cycle Systems of the DEMO-FNS Tokamak

S.S. Ananyev, Б. В. Иванов
article en
3 citations

Abstract

The applied technologies for handling tritium and the efficiency of its use in the fuel cycle of a fusion facility affect the start-up tritium inventory, the possibility of tritium self-sufficiency, etc. These parameters largely determine the cost of the facility, its efficiency, and safety during operation. Formation of the conceptual configuration of the fuel cycle, calculation of the tritium inventory in its systems, and determination of the scope for further development are important problems in facility design. In order to calculate the flows of fuel components and tritium inventory in the fuel cycle (FC) of a tokamak-based fusion neutron source, the FC-FNS code developed at the Kurchatov Institute has been used since 2013. It implements the possibility of calculating the number of hydrogen isotopes contained in different FC systems. The article describes the current state of research on modeling the flow of fuel components in FC systems of the tokamak with a tritium-breeding blanket, presents simplified schemes of FC systems, and describes the principles of their operation and the methodology for calculating the inventory of hydrogen isotopes in them. It is substantiated that the number of fuel components in the facility will be primarily determined by fuel cycle technologies, which, in turn, depend on plasma parameters and scenarios of facility operation. It is shown that, for the DEMO-FNS project with a fusion power of 40 MW, which corresponds to the combustion of 7 × 10–5 g/s of tritium, the startup tritium inventory will be 400–430 g with a circulating fuel flow through the facility chamber of up to 0.1 g/s. Increasing fuel flows through the injection, hydrogen isotope separation, and some other DEMO-FNS systems, if convective edge-localized modes (ELMs) are taken into account, will lead to an increase in the operational tritium inventory in the fuel cycle up to 500 g. If there is a tritium-breeding blanket in the facility, tritium inventory in it (including the long-term storage) will be no more than 800 g.

Physics of Atomic NucleiVol. 87(7)
Kurchatov Institute (RU)
Affordable and clean energy
Openalex Percentile: Top 8%
Magnetic confinement fusion research
1.98
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.