Research into the Possibilities of Improving the Adhesion Properties of a Locomotive

Locomotives are important vehicles, which serve for towing wagons, i.e., trains. Many factors influence the safe and cost-effective operation of locomotives and trains in general. One of these factors is adhesion at the wheel/rail contact. The adhesion determines how much power the locomotive can deliver and how the braking system will ensure that the train stops. The main way to improve adhesion is to use sand at the wheel/rail contact point. The aim of this study is to improve the efficiency of the sand system of the locomotive. For this purpose, a new sand system nozzle mounting design was proposed. The newly proposed sanding system is equipped with a nozzle mounted to the axlebox unlike the original one, which uses the nozzle attached to the bogie frame. To compare the proposed and existing design, simulation calculations were performed in Simpack software 2024.3. For the simulation computation of the locomotive bogie, two types of railway tracks were chosen. A straight track section with two angular frequencies and three amplitudes of track irregularities was created, and a real track section corresponding to several kilometers of track was modeled in the Simpack software. During the simulations, it was determined that the proposed nozzle mounting design has a smaller amplitude of motion, compared to the existing one; therefore, there is a more accurate and efficient operation of the sand system. This in turn has a favorable effect on the adhesion of the wheel with the rail. It was found out that the newly designed sanding system has a significant positive economic effect regarding saving sand. There is no sand loss during sandblasting compared with the original sanding system. This directly relates to saving costs during locomotive operation.