Introducing Sulfur in VNi-Layered Double Hydroxide Enables Efficient Electrocatalytic Oxidation of Benzylamine with High Current Densities

The replacement of the thermodynamically unfavorable anodic oxygen evolution reaction (OER) with a more favorable organic oxidation reaction, such as the anodic oxidation of benzylamine, has garnered significant interest in hybrid water electrolyzer cells. This approach promises the production of value-added chemicals alongside hydrogen fuel generation, improving overall energy efficiency. However, achieving high current density for benzylamine oxidation without interference from OER remains a challenge, limiting the practical efficiency of the electrolyzer cell. In this study, we investigated a room temperature method for sulfur introduction in VNi-layered double hydroxide (LDH) catalyst and its application for electrocatalytic benzylamine oxidation. The S-introduction in VNi-LDH was found to modulate the electronic states of nickel and vanadium, increasing the number of active sites, electrochemical surface area, and charge transfer properties. The resulting S-VNi-LDH catalyst achieved a high current density of 400 mA cm<sup>-2</sup> at only 1.39 V vs RHE potential for benzylamine oxidation, avoiding interference from oxygen evolution. The catalyst demonstrated 100% selectivity (Faradaic Efficiency = 98.6%) for the conversion of benzylamine into benzonitrile within 2.5 h of the reaction. In a two-electrode electrolysis system, S-VNi-LDH achieved a current density of 400 mA cm<sup>-2</sup> at a cell voltage of 1.50 V when OER was substituted with benzylamine oxidation. The S-VNi-LDH showed energy consumption of 4.67 kWh/m<sup>3</sup> H<sub>2</sub> for OER and 1.31 kWh/m<sup>3</sup> H<sub>2</sub> during benzylamine oxidation, indicating a high energy efficiency with exceptional stability over five cycles, maintaining 98.6 ± 0.4% FE and consistent voltage. The S-VNi-LDH also oxidized various amines, including substituted benzylamines and secondary amines, achieving high conversion (95-97%) and faradaic efficiency (85.8-98%). This study presents an eco-friendly, room-temperature method for S-doping in VNi-LDH, which out performed the reported catalysts in the literature.

Authors

Institutions

Publication Details

Journal
ACS Applied Materials & Interfaces
Published
2025-01-09
DOI
https://doi.org/10.1021/acsami.4c20149
Citations
8
Primary Topic
Electrocatalysts for Energy Conversion
Type
article
Field-Weighted Citation Impact
2.91

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Introducing Sulfur in VNi-Layered Double Hydroxide Enables Efficient Electrocatalytic Oxidation of Benzylamine with High Current Densities

Neetu Verma, Baghendra Singh, Apparao Draksharapu, Rakesh Kumar
8 citations
ACS Applied Materials & Interfaces
Electrocatalysts for Energy Conversion
2.91
article

Introducing Sulfur in VNi-Layered Double Hydroxide Enables Efficient Electrocatalytic Oxidation of Benzylamine with High Current Densities

Neetu Verma, Baghendra Singh, Apparao Draksharapu, Rakesh Kumar
article en
8 citations

Abstract

The replacement of the thermodynamically unfavorable anodic oxygen evolution reaction (OER) with a more favorable organic oxidation reaction, such as the anodic oxidation of benzylamine, has garnered significant interest in hybrid water electrolyzer cells. This approach promises the production of value-added chemicals alongside hydrogen fuel generation, improving overall energy efficiency. However, achieving high current density for benzylamine oxidation without interference from OER remains a challenge, limiting the practical efficiency of the electrolyzer cell. In this study, we investigated a room temperature method for sulfur introduction in VNi-layered double hydroxide (LDH) catalyst and its application for electrocatalytic benzylamine oxidation. The S-introduction in VNi-LDH was found to modulate the electronic states of nickel and vanadium, increasing the number of active sites, electrochemical surface area, and charge transfer properties. The resulting S-VNi-LDH catalyst achieved a high current density of 400 mA cm<sup>-2</sup> at only 1.39 V vs RHE potential for benzylamine oxidation, avoiding interference from oxygen evolution. The catalyst demonstrated 100% selectivity (Faradaic Efficiency = 98.6%) for the conversion of benzylamine into benzonitrile within 2.5 h of the reaction. In a two-electrode electrolysis system, S-VNi-LDH achieved a current density of 400 mA cm<sup>-2</sup> at a cell voltage of 1.50 V when OER was substituted with benzylamine oxidation. The S-VNi-LDH showed energy consumption of 4.67 kWh/m<sup>3</sup> H<sub>2</sub> for OER and 1.31 kWh/m<sup>3</sup> H<sub>2</sub> during benzylamine oxidation, indicating a high energy efficiency with exceptional stability over five cycles, maintaining 98.6 ± 0.4% FE and consistent voltage. The S-VNi-LDH also oxidized various amines, including substituted benzylamines and secondary amines, achieving high conversion (95-97%) and faradaic efficiency (85.8-98%). This study presents an eco-friendly, room-temperature method for S-doping in VNi-LDH, which out performed the reported catalysts in the literature.

ACS Applied Materials & InterfacesVol. 17(3)
Indian Institute of Technology BHU (IN), Banaras Hindu University (IN), Indian Institute of Technology Kanpur (IN)
Indian Institute of Technology Kanpur, Science and Engineering Research Board
Clean water and sanitation
Openalex Percentile: Top 10%
Electrocatalysts for Energy Conversion
2.91
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.