Measurement of the flexoelectric coefficients in van der Waals materials with separation of piezoelectricity

Abstract The flexoelectric coefficient is a key material parameter describing the interaction between the electric polarization and strain gradient, which is of significance to design high-performance flexoelectric devices. The macroscopic cantilever bending and truncated pyramid compression are common approaches to measure the flexoelectric coefficients of bulk materials. However, these conventional methods are challenging for the small-sized van der Waals (vdW) materials that have recently emerged in the field of flexoelectricity, especially for piezoelectric ones to separate flexoelectric and piezoelectric contribution. In this work, we design vdW materials-embedded multilayer structures for accurately measuring its flexoelectricity. An oscillatory four-point bending deformation is applied to the multilayer structures and induces stable flexoelectric current. Combined with a theoretical model, the contribution of the piezoelectricity is separated through measuring the current variation among the multilayer structures in which the vdW material is embedded in different plane position. The flexoelectric coefficients of two typical vdW materials, piezoelectric CuInP 2 S 6 and non-piezoelectric 2H-MoS 2 , are measured as −25.6 nC m −1 and 174.1 nC m −1 , respectively. And large flexocoupling coefficients are found in both vdW materials. This work provides a new method for the intrinsic flexoelectric measurements of small-sized vdW materials with separating piezoelectric contribution and brings new insights into the exploration of high-performance flexoelectric materials.