Experimental Study of 2-Ethylhexyl Nitrate Effects on Engine Performance and Exhaust Emissions of Diesel Engine Fueled with Diesel–2-Methylfuran Blends

2-Methylfuran (2-MF) has emerged as a promising renewable alternative fuel, primarily due to its sustainable production processes and its potential to significantly reduce soot emissions. However, when blended with diesel, it presents challenges, including an increase in NOx emissions, which is attributed to the lower cetane number (CN) of the M30 blend. This study investigates the effect of adding 2-ethylhexyl nitrate (2-EHN), a cetane enhancer, to the M30 blend (30% 2-MF by volume), on combustion characteristics and exhaust emissions. Experiments were conducted using a modified four-cylinder, four-stroke, direct-injection compression ignition (DICI) engine featuring a common rail fuel injection system. The engine was evaluated under different load conditions, with brake mean effective pressure (BMEP) ranging from 0.13 to 1.13 MPa, while maintaining a constant engine speed of 1800 rpm. The incorporation of 1.5% and 2.5% 2-EHN into the M30 blend enhanced combustion performance, as indicated by a reduction in the maximum pressure rise rate, a shorter ignition delay (ID), and an extended combustion duration (CD). Furthermore, the brake-specific fuel consumption (BSFC) reduced by 2.78% and 5.7%, while the brake thermal efficiency (BTE) increased by 3.54% and 7.1%, respectively. Moreover, the inclusion of 2-EHN led to a significant reduction in Nox by 9.20–17.57%, with the most significant reduction observed at a 2.5% 2-EHN, where hydrocarbon (HC) decreased by 7.93–21.59%, and carbon monoxide (CO) reduced by 12.11–33.98% as compared to the M30 blend without 2-EHN. Although a slight increase in soot emissions was observed with higher concentrations of 2-EHN, soot levels remained significantly lower than those from pure diesel. The results indicate that the addition of 2-EHN can effectively mitigate the trade-off between NOx and soot emissions in low cetane number oxygenated fuels.

Authors

Institutions

Publication Details

Journal
Energies
Published
2024-12-30
DOI
https://doi.org/10.3390/en18010098
Citations
4
Primary Topic
Catalytic Processes in Materials Science
Type
article
Field-Weighted Citation Impact
0.47

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Experimental Study of 2-Ethylhexyl Nitrate Effects on Engine Performance and Exhaust Emissions of Diesel Engine Fueled with Diesel–2-Methylfuran Blends

Pang‐Chieh Sui, Nasreldin M. Mahmoud, Maji Luo, Balla M. Ahmed et al.
4 citations
Energies
Catalytic Processes in Materials Science
0.47
article

Experimental Study of 2-Ethylhexyl Nitrate Effects on Engine Performance and Exhaust Emissions of Diesel Engine Fueled with Diesel–2-Methylfuran Blends

Pang‐Chieh Sui, Nasreldin M. Mahmoud, Maji Luo, Balla M. Ahmed, Hassan A. M. Elbadawi
article en
4 citations

Abstract

2-Methylfuran (2-MF) has emerged as a promising renewable alternative fuel, primarily due to its sustainable production processes and its potential to significantly reduce soot emissions. However, when blended with diesel, it presents challenges, including an increase in NOx emissions, which is attributed to the lower cetane number (CN) of the M30 blend. This study investigates the effect of adding 2-ethylhexyl nitrate (2-EHN), a cetane enhancer, to the M30 blend (30% 2-MF by volume), on combustion characteristics and exhaust emissions. Experiments were conducted using a modified four-cylinder, four-stroke, direct-injection compression ignition (DICI) engine featuring a common rail fuel injection system. The engine was evaluated under different load conditions, with brake mean effective pressure (BMEP) ranging from 0.13 to 1.13 MPa, while maintaining a constant engine speed of 1800 rpm. The incorporation of 1.5% and 2.5% 2-EHN into the M30 blend enhanced combustion performance, as indicated by a reduction in the maximum pressure rise rate, a shorter ignition delay (ID), and an extended combustion duration (CD). Furthermore, the brake-specific fuel consumption (BSFC) reduced by 2.78% and 5.7%, while the brake thermal efficiency (BTE) increased by 3.54% and 7.1%, respectively. Moreover, the inclusion of 2-EHN led to a significant reduction in Nox by 9.20–17.57%, with the most significant reduction observed at a 2.5% 2-EHN, where hydrocarbon (HC) decreased by 7.93–21.59%, and carbon monoxide (CO) reduced by 12.11–33.98% as compared to the M30 blend without 2-EHN. Although a slight increase in soot emissions was observed with higher concentrations of 2-EHN, soot levels remained significantly lower than those from pure diesel. The results indicate that the addition of 2-EHN can effectively mitigate the trade-off between NOx and soot emissions in low cetane number oxygenated fuels.

EnergiesVol. 18(1)
Wuhan University of Technology (CN), Sinnar University (SD), Sudan University of Science and Technology (SD)
China Scholarship Council
Responsible consumption and production
Openalex Percentile: Top 37%
Catalytic Processes in Materials Science
0.47
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.