Structural Stability of Cycle Paths—Introducing Cycle Path Deflection Bowl Parameters from FWD Measurements

A recurrent challenge on cycle paths are edge cracks, which affect the traffic safety and accessibility of cyclists and produce high maintenance costs. Being both structurally thinner and narrower structures than roads, the cycle paths are extra prone to this problem. A few passages of heavy vehicles in unfavourable conditions might be enough to break the edge. The load-bearing capacity of eight municipal cycle paths in Linköping, Sweden, were assessed by falling weight deflectometer (FWD) and light falling weight deflectometer (LWD) measurements during a year-long cycle. A set of alternative Deflection Bowl Parameters (DBPs), better adapted to the structural design of cycle paths, were suggested and evaluated. The results of the FWD measurements showed that these suggested DBPs are a promising approach to evaluate the load-bearing capacity of cycle paths. From the results of the LWD measurements, it was found that the load-bearing capacity varies considerably with lateral position. The conclusion is that it might be more fruitful to measure the load-bearing capacity by LWD close to the edge, rather than the traditional approach of FWD measurements along the centre line of the cycle path.