Catalytic Pyrolysis Characteristics of Potassium Chloride on Ash Branch Wood and Its Kinetic Study

Branch wood, as a renewable biomass resource, presents certain challenges due to its high volume, complex physical properties, difficulty in handling, and relatively high production costs. Potassium chloride (KCl) treatments were applied to ash branch wood (ABW) using solutions with concentrations of 5%, 10%, and 15% via immersion. Pyrolysis tests were performed at different pyrolysis temperatures (450 °C, 600 °C, 750 °C) and different pyrolysis times (2 h, 3 h, 4 h). The thermal degradation behavior was meticulously examined through Thermogravimetric Analysis (TGA). Furthermore, the pyrolysis kinetics were assessed using the Flynn–Wall–Ozawa (FWO) model, which allowed for the determination of the kinetic parameters and the exploration of the catalytic influence of KCl on the pyrolysis process. The morphology and adsorption properties of the biochar were evaluated employing SEM-EDS and BET characterization methods, respectively. The results show that the higher the impregnation concentration of ABW, the greater the shift in the TG and DTG curves, and the lower the initial temperature and maximum weight loss temperature in the devolatilization stage. The calculation of pyrolysis kinetic parameters indicates that adding a higher concentration of KCl to ABW results in a lower initial temperature and activation energy for the volatile phase of ABW. At the same time, a higher KCl concentration leads to an increased biochar yield; under single-factor conditions, a biochar yield of up to 35.81% can be achieved with an impregnation concentration of 15%. A lower KCl is more conducive to the pyrolysis reaction, with a lower activation energy throughout the devolatilization stage compared to raw ABW. Additionally, ABW treated with a low concentration of KCl results in a higher specific surface area and pore volume of the biochar. The maximum values are achieved when the KCl solution concentration is 5%, with a specific surface area of 4.2 m2/g and a pore volume of 0.00914 cm3/g. Based on these results, this paper explores the catalytic pyrolysis patterns of KCl on branch waste, providing theoretical guidance for the effective utilization of branch wood and the preparation process of biochar.