Justification of the scheme of melting ice on the wires of overhead power lines

The article discusses an urgent problem related to the formation of ice and frost deposits on the wires of overhead power lines, which causes significant technical difficulties in ensuring the reliability of power supply, especially in winter. The accumulation of ice and frost on the wires leads to an increase in the weight of the wires, which can cause them to sag, damage insulators, destroy poles, and, as a result, serious accidents on power lines. The causes of accidents in power grids due to ice and frost deposits are analyzed and it is found that their elimination will reduce the probability of damage to overhead power lines from the action of ice loads. However, existing methods of dealing with this problem have a number of disadvantages, such as high cost, low efficiency in certain conditions, and negative environmental impact. The article presents a scheme for melting ice on the wires of overhead power lines by the method of a three-phase short circuit when powered by a power source with a solidly grounded and isolated neutral. This scheme makes it possible to locally increase the temperature of wires to a level sufficient to melt ice and frost, which reduces the risk of emergencies and ensures the uninterrupted operation of the electrical grid. The article provides theoretical justifications for the scheme for melting ice with three-phase short-circuit currents, which confirm its effectiveness. The analysis has shown that the proposed scheme is economically feasible, as it reduces the cost of maintenance and repair of overhead power lines. In addition, it is environmentally friendly, as it does not involve the use of chemicals. Thus, the proposed scheme for melting ice on the wires of overhead power lines is a promising solution for improving the reliability and safety of power supply in winter weather conditions. Its application can significantly increase the efficiency of power grid operation, reduce the number of accidents, and improve the stability of power supply to consumers.