The Heterogeneity Characterization of Lacustrine Shale Pores in the Daanzhai Member of the Ziliujing Formation in the Yuanba Area, Sichuan Basin

To investigate the heterogeneous characteristics of the shale pore size distribution (PSD) of the Daanzhai Member in the Ziliujing Formation in the Sichuan Basin and its influencing factors, an analysis of its shale components, pore structure, and morphology was conducted. The analysis methods included the determination of total organic carbon (TOC), field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), LP-CO2GA, and LT-N2GA. The heterogeneity of the PSD was further analyzed via multifractal theory. The results indicate that the PSDs of both micropores and mesopores in shale exhibit multifractal features. The heterogeneity of mesopores is higher than that of micropores, but the pore connectivity is lower in mesopores than in micropores. Additionally, the degree of dispersion is higher in mesopores than in micropores. The PSD of micropores is influenced mainly by pores in the range of 0.30~0.70 nm in diameter. The distribution of mesopores is significantly affected by pores within the range of 2~10 nm in diameter. The pore connectivity and heterogeneity of mesopores are influenced primarily by the specific surface area (SSA) of the shale. In the case of micropores, both the SSA and pore volume (PV) contribute to the pore connectivity and heterogeneity. The effects of the rock components on the pore heterogeneity and connectivity vary significantly, with mineral components being the primary factors influencing pore heterogeneity. Compared with those of the mature Bakken Formation and the overmature Wufeng–Longmaxi Formation, the shale of the high-maturity Daanzhai Member has higher small-scale pore heterogeneity but weaker mesopore heterogeneity.