Sustainable geopolymer adsorbents utilizing silica fume as a partial replacement for metakaolin in the removal of copper ion from synthesized copper solution

Biochar has great significance for controlling heavy metal pollution. Nevertheless, its application is impeded by certain shortcomings, such as a limited adsorption capacity, a slow adsorption rate, and poor reusability. Besides, the physical adsorption capacity of raw biochar to heavy metals is suboptimal. As a result, researchers prefer to use geopolymer-based adsorbents for the removal of heavy metals due to their excellent immobilization effect. However, no research has been done on the synthesis of geopolymer-based adsorbent using silica fume for heavy metal adsorption. Thus, the aim of this study is to partially replace metakaolin (MK) with silica fume (S1) (25, 50, 75 and 100 %) in geopolymer formulation at varied S:L ratio (0.4, 0.6, 0.8 and 1.0) to study the impact on the geopolymerization and its following properties in the removal efficiency of copper (Cu 2 + ). Characterization techniques such as Energy dispersive X-ray fluorescence (EDXRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM) and Energy dispersive X-ray spectroscopy (EDX) were used to study the physicochemical properties of the developed geopolymer. The concentration of Cu 2+ before and after adsorption was determined by Atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. Based on the experimental result, the geopolymer prepared with 25 % MK and 75 % S1 at S:L of 0.6 maintained the high removal efficiency of Cu 2+ (99.62 %) with 100 % MK geopolymer (98.56 %). The generation of N-A-S-H gel with the 75 % replacement level of S1 producing more reactive Si and Al binding sites for Cu 2+ adsorption. In addition, S1 contains exchangeable cations such as Ca 2+ , Mg 2+ and Na + which further promote the adsorption of Cu 2+ by ion exchange. Moreover, the mechanisms such as chemical bonding and precipitation were involved in the adsorption of Cu 2+ . Hence, this research could serve as a basis for the development of solid waste based geopolymers that could remove heavy metal ions from aqueous solution.