The Characteristics of Hydrodeoxygenation of Biomass Pyrolysis Oil over Alumina-Supported NiMo Catalysts

The hydrodeoxygenation (HDO) of biomass pyrolysis oil (BPO) was evaluated in the presence of two commercial alumina-supported transition metal catalysts, NiMo/alumina-1 (NM1) and NiMo/alumina-2 (NM2). The study explored two characteristic aspects: how HDO reaction conditions affected the oxygen content, density, and boiling point distribution of BPO with varying temperature and HDO reaction time, and the roles of catalysts. Characterizations of HDO-treated oils included elemental analysis, GC-MS, SIMDIS, 13C NMR, and 1H NMR, and characterizations of catalysts included NH3-TPD, XRF, and TPO-MS analysis. The results show that both NM1 and NM2 catalysts removed oxygenated compounds effectively, which led to decreases in density and shifts toward higher boiling point distributions of BPO. Compared to the NM1 catalyst, NM2 had a higher acidity and enhanced HDO activity. The best HDO reaction performance was achieved in the presence of the NM2 catalyst at 300 °C. Furthermore, HDO reactions showed a significant amount of CO2, CH4, C2H6, and C3H8, which suggests that HDO reactions proceeded via a series of reactions of decarboxylation, water–gas shift, and methanation. In addition, hydrocarbon fraction tests suggested a favorable potential for the blending of HDO-treated biomass pyrolysis oil (HDO-BPO) with petroleum-derived fractions.