Phase Evolution, Stability and Magnetic Behavior of Lightweight Al–Fe Aluminide‐Based Nanocomposites Processed by Mechanical Alloying, Cryomilling, and Annealing

Attempts are made to synthesize Al 5 Fe 2 aluminide‐based composites by mechanical alloying (MA) and cryomilling (CM). The XRD and TEM results of the milled samples confirm the formation of a major B2‐AlFe phase (0.2887 ± 0.0003 nm; cP2) along with the minor amount of Al 5 Fe 2 phase. Nanocrystalline grains of ≈16 nm and an average particle size of 4.0 ± 0.36 μm are evident. A significant refinement in the crystallite size (≈10 nm) and average particle size (1.0 ± 0.03 μm) is achieved after 10 h CM of 60 h MAed powder. CM enhances the phase fraction of the Al 5 Fe 2 phase. The DSC thermogram discerns three exothermic heating events due to phase transformation. These can be corroborated by the structural transformation of the B2‐AlFe phase to the orthorhombic Al 5 Fe 2 phase. The phase obtained as a result of 60 h of MA transforms to orthorhombic Al 5 Fe 2 along with a minor amount of pre‐existing B2‐AlFe structure after annealing at 600 °C. It becomes more stable after annealing at 900 °C. Further, the 60 h milled sample displays soft ferromagnetic properties. The saturation magnetization decreases on CM and annealing due to phase transition from B2‐AlFe to Al 5 Fe 2 phase. Coercivity is reduced when the MA sample is annealed due to an increase in crystallite size and a reduction in lattice strain.